Author Topic: [SOLVED] Wireguard duplicate Firewall Rule after update (Read 6135 times)

racef@ce · « **on:** December 13, 2018, 07:10:57 pm »

Hello,
I had set up a functional wireguard config in a "road warrior" scenario.
It no longer works after the required reboot of today's update to 18.7.9. it looks like a second Interface WG0 together with Interface WireGuard now shows up in the Firewall Rules section.

The solution was to duplicate the existing Firewall Rule for interface WG0 (view attachment).
It seems that interface: WireGuard is unnecessary, however you can not remove it.

franco · « **Reply #1 on:** December 14, 2018, 12:05:36 am »

https://twitter.com/opnsense/status/1073199933866602496

racef@ce · « **Reply #2 on:** December 14, 2018, 10:14:34 am »

Hello Franco,
Thanx, I already installed the newest plugin os-wireguard-devel 0.8_1 en restarted the Firewall.
In the Firewall Rule sections the interface: WireGuard remains.

mimugmail · « **Reply #3 on:** December 14, 2018, 10:27:53 am »

Did you assign an Interface in the past?

franco · « **Reply #4 on:** December 14, 2018, 12:46:00 pm »

WireGuard group is correct, it is the same as IPsec and OpenVPN.

The wg0 is from manual interface assignment on your part. Both work interchangeably, but the group is for all devices, the individual devices are .... individual.

Cheers,
Franco

racef@ce · « **Reply #5 on:** December 14, 2018, 04:35:41 pm »

Thanks for your explanation Franco.
So it should be like that.

Author Topic: [SOLVED] Wireguard duplicate Firewall Rule after update (Read 6135 times)

racef@ce

[SOLVED] Wireguard duplicate Firewall Rule after update

franco

Re: Wireguard duplicate Firewall Rule after update

racef@ce

Re: Wireguard duplicate Firewall Rule after update

mimugmail

Re: Wireguard duplicate Firewall Rule after update

franco

Re: Wireguard duplicate Firewall Rule after update

racef@ce

Re: Wireguard duplicate Firewall Rule after update