OPNsense won't reboot (CAM status: Command timeout)

[eric8bits]

I (finally) managed to install OPNsense on my Qotom box but sadly encounter a new issue.

Completing the wizard after installing to the local hard disk drive (SSD) is not an issue. Things went south as soon as I rebooted the machine.

The errors I'm getting: https://tweakers.net/ext/f/61Nb85twZgIWqcRgavtBoAI7/full.jpg

Basically

ahcich0: Timeout on slot 24 port 0
WRITE_FPDMA_QUEUED
CAM status: Command timeout
Retrying command

And this keeps on going getting nowhere.

I do not have this issue with Debian or pfSense.

Anyone a clue maybe?

[eric8bits]

I gave up. Back to pfSense.

[franco]

Silly question maybe, as per your other thread did you install any pfSense version older than 2.4.4 on that particular box? It may be an issue with FreeBSD 11.1.


Cheers,
Franco

[eric8bits]

No it's a good question I only installed pfSense 2.4.4.

It might be a hardware compatibility issue with the FreeBSD version that comes with OPNsense. Just a wild guess.

[franco]

If you're still up for it try these images, published a few hours ago based on 11.2.

https://forum.opnsense.org/index.php?topic=10135.0

(Even if just for us to see if that issue persists or is really solved.)


Thanks,
Franco

[eric8bits]

My wife will kill me if I take down the Wi-Fi one more time this week We had a lot of downtime hahaha.

I will give it a shot next week and report back.

[franco]

That's appreciated and understandable. The SWMBO approval rating must remain high.


Cheers,
Franco

[seaweed]

Been trying to install on minipc linked below.  Lost a solid day of work tinkering with
It has been a nightmare
Just posting because I am having the same experience(error etc) as OP

But perhaps you will be able to use this info to help figure out what keeps causing the kernel crash during reboot.
I'm not strong enough in *nix to provide any other tangible or usable data.
Returning the mini pc, hopefully, Ill find some hardware I can run it on.


Amazon
Ucaca Industrail PC Fanless Mini Desktop Computer with Intel Celeron 1037U Dual Core CPU, 8GB RAM, 128GB SSD, Intel HD Graphics, 2NICs, 4USB 3.0, 4COM RS232, HDMI, WiFi，Windows 10

[seaweed]

I just deployed on a dell desktop w/o any issues what so ever.
Darn mini pc must have some incompatible hardware.
Just following up so you wouldn't I was a random fly-by  h8r