Author Topic: Problems about Services: DHCP (Read 3777 times)

rocketme · « **on:** July 19, 2018, 08:39:34 am »

1、Why DHCP Server is down and I COULD NOT use DHCP RELAY?
picture:DHCP02.png、DHCP03.png

2、I unselect Enable DHCP server on the LAN interface and why GUI check the value?
picture:DHCP01.png

franco · « **Reply #1 on:** July 19, 2018, 10:01:29 am »

The DHCP server showing status red in the upper right corner means you configured it at some point. You need to switch it off sensibly, even if it means filling out fields that should have been filled out before. When it is of you can use relay.

The indication that it doesn't start and missing the ranges is a clear sign that something went wrong with the configuration, but it's not unfixable.

And please update, 18.1.6 is old.

Cheers,
Franco

rocketme · « **Reply #2 on:** July 19, 2018, 10:28:56 am »

oh,yeah.
I reactivated a closed interface and found that the DHCP service of the interface was enabled. So even if the interface has been shut down, will its DHCP configuration be empty?

franco · « **Reply #3 on:** July 19, 2018, 10:40:08 am »

I don't know. This was never reported before.

Cheers,
Franco

rocketme · « **Reply #4 on:** July 19, 2018, 10:58:49 am »

I did a test: an interface was enabled and the DHCP service of the interface was enabled.
Then I removed this interface and finally found that DHCP relay can be enable immediately. May this be the difference between unenable and deleting?

Author Topic: Problems about Services: DHCP (Read 3777 times)

rocketme

Problems about Services: DHCP

franco

Re: Problems about Services: DHCP

rocketme

Re: Problems about Services: DHCP

franco

Re: Problems about Services: DHCP

rocketme

Re: Problems about Services: DHCP