[SOLVED] IPV6 issues after update

[meschmesch]

Hello,
after the update to 24.7.3_1 IPv6 adresses are not assigned to the interfaces via track interface correctly. Only WAN and the first interface obtain a respective prefix, while all other interfaces get the same prefix assigned shared over all interfaces. Ping6 from WAN interface works.

I use DHCPv6 on WAN. Track Interface on LAN, DMZ etc. Further, I use some HA setup for which I have ticked "Allow manual adjustment of DHCPv6 and Router Advertisements" on all interfaces - unfortunately in the RA section the previously avaible "source address" does not show anything else than "automatic". Previously, I was able to select a virtual IP...

Any solutions on that or shall I just wait for a new update?
Thx.

UPDATE:
It works, don't know why. After a while it worked again with 24.7.3_1. Further, as a change I had to modify my previously used CARP Address to fe80::192.168.2.1/64 reverting from fd00:: ... used previously. Now I can select the CARP interface for HA.