Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
24.1 Legacy Series
»
Still problems with WAN IPv6 on 24.1.10_3
« previous
next »
Print
Pages:
1
[
2
]
Author
Topic: Still problems with WAN IPv6 on 24.1.10_3 (Read 1646 times)
franco
Administrator
Hero Member
Posts: 17660
Karma: 1611
Re: Still problems with WAN IPv6 on 24.1.10_3
«
Reply #15 on:
July 22, 2024, 10:59:44 pm »
Hi Torsten,
You may have issues due to the patch, not because it is missing. opnsense-patch can revert it (and reapply if you run it again) so you can see if it does something or not.
No worries, IPv6 can be like that.
Cheers,
Franco
Logged
tokade
Full Member
Posts: 122
Karma: 5
Re: Still problems with WAN IPv6 on 24.1.10_3
«
Reply #16 on:
July 22, 2024, 11:29:02 pm »
Hi Franco,
i reverted the patch 3b49f8a and reloaded the WAN interface. After that the CLI still shows the IPv6 detached, but now the GUI dashboard shows the address too.
All IPv6 pings to outside and access via IPv6 from outside are working. Only the gateway monitoring still isn't working. Haven't rebooted yet, will do that tomorrow.
Thx and good nite
Torsten
Logged
tokade
Full Member
Posts: 122
Karma: 5
Re: Still problems with WAN IPv6 on 24.1.10_3
«
Reply #17 on:
July 23, 2024, 08:57:18 pm »
Hi Franco,
did some more tests and that are the results (always with the reverted patch):
DHCPv6 (is the best option)
==> WAN gets IPv6 address, shown by ifconfig in CLI and GUI
==> WAN shows "detached" by ifconfig in CLI
==> can ping IPv6 addresses from opnsense to Internet
==> my opnsense WAN interface is reachable by IPv6 from outside
==> gateway monitoring for IPv6 doesn't work
PPPoEv6
==> WAN gets
no
IPv6 address
==> can
not
ping IPv6 addresses from opnsense to Internet
==> my opnsense WAN interface is
not
reachable by IPv6 from outside
==> gateway monitoring for IPv6 doesn't work
SLAAC
==> WAN gets IPv6 address, shown by ifconfig in CLI and GUI
==> WAN shows "detached" by ifconfig in CLI
==> can
not
ping IPv6 addresses from opnsense to Internet
==> my opnsense WAN interface is
not
reachable by IPv6 from outside
==> gateway monitoring for IPv6 doesn't work
In the case of DHCPv6 I added in another test the already assigned IPv6 address via CLI
==> WAN interface no longer detached shown by ifconfig in CLI
==> gateway monitoring for IPv6 works as expected
With the reverted patch and the workaround to add the address with ifconfig via CLI the gateway monitoring for IPv6 works again. So I have the functionality back from 24.1.8. If it will help you, I can revert to 24.1.8 to check what ifconfig will show for the WAN interface.
Kind regards
Torsten
Logged
Print
Pages:
1
[
2
]
« previous
next »
OPNsense Forum
»
English Forums
»
24.1 Legacy Series
»
Still problems with WAN IPv6 on 24.1.10_3