Netmap 10G

[sy]

Dear Fellow Zenarmor Users,

We had to change multi-core support priority at the beginning of this year for the critical SSE and TLS inspection features. The team is started to work for multicore support and planning to ship at the en of the year. Many thanks to all for your patience and cooperation.

[NW4FUN]

I've now uninstalled Zenarmor for good and going to cancel my subscription at the end of its term (wish I had a refund TBH!!)

Now no more errors on IFs (either physical or VLANs) and performances are gone back up to more than decent.

HOWEVER, what puzzles me is that Speedtest returns just 5G DL/UL when tested at FW level via CLI and 1G clients are capped at 740M DL while UL is fine at 940M.

I may open a new topic somewhere else...but, what do you think might be the cause of this?

I'm running on a Deciso DEC3840 with 64G ECC RAM

[sy]

 Hi,

Sorry to hear that and hope to see you again when Zenarmor supports multicore.

Do you use any other inspection tool like Suricata or etc?

[Greg_E]

I get similar speeds on mine with Zenarmor in place (900 up and 700 down), yes it is odd as I've previously clocked more than 900 each way on my connection at work. I'm just leaving it there and not worrying, it's enough for my department's needs right now. I do have IDS/IPS and Crowdsec running along with Zenarmor and all gigabit connections on an Intel i350 4 port card. CPU never really runs above 50% and normally less than 10% when testing. Tested with both Speedtest.net and Fast.com.

I'm setting up a fresh Business level install, maybe I will test before I start adding the protections and see what happens. Might be fun to log each resource and see the impact of each. It's also a different processor (Intel vs AMD for testing device).