Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Remove Parent Interface
« previous
next »
Print
Pages: [
1
]
Author
Topic: Remove Parent Interface (Read 728 times)
s4rs
Full Member
Posts: 144
Karma: 5
Remove Parent Interface
«
on:
January 31, 2024, 09:57:29 pm »
IIRC back in 22.x due to a bug we had to create a Parent interface for vlan WAN connections or turn on Promiscuous mode. I have read this was fixed and no longer necessary. I tried removing the the Parent on one a system and when I do the WAN interface no longer works. It receives a DHCP address from the WAN but I can't ping anything. I tried deleting the Parent then run the interface wizard to redefine the interface to no avail.
What are the proper steps to removed the Parent to get things working?
Logged
franco
Administrator
Hero Member
Posts: 17661
Karma: 1611
Re: Remove Parent Interface
«
Reply #1 on:
January 31, 2024, 10:15:51 pm »
Promiscuous mode only works on the parent, because that's the interface that passes (and discards) packets first.
The whole parent debate was about VLANs and where their hardware settings apply, but then people also wanted MAC spoofing per VLAN which introduced the promiscuous mode setting to make it possible... but, again, that only makes sense on the parent an must be set explicitly (since it degrades performance too).
I think you are mixing this up a bit.
Cheers,
Franco
Logged
s4rs
Full Member
Posts: 144
Karma: 5
Re: Remove Parent Interface
«
Reply #2 on:
January 31, 2024, 10:31:12 pm »
Franco, thanks for the reply. Since I have a single VLAN adapter (WAN, LAN. GUEST) and do WAN MAC spoofing. Do I still need a Parent for this setup?
«
Last Edit: January 31, 2024, 10:33:15 pm by s4rs
»
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Remove Parent Interface