[SOLVED] Cant setup webserver from behind opnsence

[steelmm]

Hi Guys,
Please can somebody help me out here

I cannot setup my webserver in opnsense correctly for some season maybe i have overlooked

my setup is fritzbox/vdsl2 router on port 192.168.1.254 with firewall already setup rules working within that setup and   my webserver address is 192.168.1.59

i have assigned 192.168.1.146 for opnsense lan address and static address through the fritzbox is 192.168.1.193

I have setup rules for internet access port 80 in opnsense lan side which works all web access for http connecting through 192.168.1.146  but when i set up my websever 192.168.1.59  on the lanside it still does not work timed out error always
i have setup wan rules -any to 192.168.1.59/24 still no luck resolving the issue also port forwarding nat rules that forwards to my internal lan ,i am trying every combination. I have setup nat reflection allowed aswell for the firewall rules without sucess

please anybody can you mention a solution.

I am starting to think maybe its my router vdsl2 problem? maybe firewall being up on the router side i will check this


Thanks


Mark

[fabian]

I have not read the full post but it could be a routing issue (if you have the same network on lan and wan). In such a case it does not know that those are different networks and it can be sent to the wrong one. It could be fixed by changing the network part of the address (for example by increasing the number in the 3rd byte by one if you use a /24 network).

[steelmm]

Many thanks i will try to do what you said to do with two different networks joined 


thanks for your help


mark

[steelmm]

Hello

Yes this solved the issue everything work perfect now after creating to subnet addresses


Regards

Mark