zenamor missing wan interface em0 (and not blocking anything anymore)

[daudo]

Hi,

after working for quite a long time, zenamor has stopped working for me some weeks ago following the latest major update. What essentially happens is nothing. While I can have a look at open web/dns/tls/... sessions (so it appears to be intercepting traffic), nothing is blocked or "protected" at all anymore.

The best guess I have about this is because in the new configuration my wan interface em0 is missing, see the attached screenshots.

Any ideas?

[beki]

Hi daudo,

By default WAN interface or default gateway interface of the firewall is not displayed on the Zenarmor configuration page, so you cannot choose to secure them.
For more information:
https://www.zenarmor.com/docs/troubleshooting/configuration#wan-interface-not-detected

Could you verify/confirm that filtering is not working on your LAN interface?
If not, you may share your log and config files by clicking on Send Feedback link.
https://www.zenarmor.com/docs/support/reporting-bug#as-of-v114

Bests

[daudo]

Hi Beki,

thanks for the information. I wasn't aware that the WAN interface wouldn't be shown on purpose and subsequently didn't really check the new config UI, because I thought that all my issues were due to the "missing" interface.

However, after checking the available config options, it seems that I simply didn't configure any blocks and after enabling them, everything works now.

Thanks again!