Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
Can't get telekom ipv6 to work on LAN side
« previous
next »
Print
Pages: [
1
]
Author
Topic: Can't get telekom ipv6 to work on LAN side (Read 1408 times)
NovyLevi
Newbie
Posts: 8
Karma: 0
Can't get telekom ipv6 to work on LAN side
«
on:
July 26, 2023, 07:41:08 pm »
Hey everyone!
Total newbie at OPNSense, and I've been trying to set up ipv6 for the last couple of days without success. I have followed all the tutorials and troubleshooting guides I could find online. I believe I have tried all the possible combinations of settings, but none of them has worked. Currently using track interface, with manual settings disabled. I have also added multiple firewall rules to allow icmpv6 packages with no help.
The only error(s) I see is on the attached image: /interfaces.php: dhcpd_radvd_configure(auto) found no suitable IPv6 address on ix0 (ix0 is LAN)
WAN side has an ipv6 address, and can ping ipv6 hosts. But no matter what settings I use I can't get it to work on the LAN side (I haven't tried setting static ipv6 addresses as my ISP provides me with a dynamic address.) Ipv4 is working perfectly.
Could you please help me resolve this issue?
Thanks in advance!
Logged
Maurice
Hero Member
Posts: 1213
Karma: 158
Re: Can't get telekom ipv6 to work on LAN side
«
Reply #1 on:
July 27, 2023, 03:05:01 am »
ISP_Modem_Info.png
doesn't show a modem, but a router. So you're running OPNsense behind another router. This only works if the other router supports downstream prefix delegation, which most cheap routers provided by ISPs don't.
Solution: Switch that Telekom router to bridge mode / modem mode or replace it with an actual modem.
Cheers
Maurice
Logged
OPNsense virtual machine images
OPNsense aarch64 firmware repository
Commercial support & engineering available. PM for details (en / de).
NovyLevi
Newbie
Posts: 8
Karma: 0
Re: Can't get telekom ipv6 to work on LAN side
«
Reply #2 on:
July 27, 2023, 08:16:29 am »
Thank you, I will ask Telekom for my PPPoE login information, and try to set it up this way.
I will report back as soon as progress is made
Logged
beisser
Newbie
Posts: 34
Karma: 1
Re: Can't get telekom ipv6 to work on LAN side
«
Reply #3 on:
July 27, 2023, 09:46:44 am »
i can tell you that telekom pppoe works just fine with opnsense. i have it running behind a fritzbox (running as modem).
it will not work with a speedport router because those cant be configured for pppoe passthrough.
so if you have a fritzbox and get stuck with it ping me and we can work this out.
Logged
NovyLevi
Newbie
Posts: 8
Karma: 0
Re: Can't get telekom ipv6 to work on LAN side
«
Reply #4 on:
August 20, 2023, 03:54:22 pm »
Hey!
Thank you so much for helping me. It works flawlessly via pppoe!
P.S.: It wasn't the solution I was originally looking for, as DHCPv6 works behind the ISP router at another place where I have Telekom, and I though it would work here also. But obviously it depends on the modem provided.
Thank you again for being so patient and helpful!
Keep up the positivity!
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
Can't get telekom ipv6 to work on LAN side