Problems w/ IPv6 / IPv4

[velvet]

Hi,

I have problems with IPv6. after a reboot I sometimes have no network - neither with v6 nor with v4. I don't get a v6 prefix and the dhcpv6 daemon process is stopped! a restart does not work - crashes again and again. only deactivating IPv6 on the WAN interface and a restart helps to get v4 going! a reboot of the fritzbox and OPNsense brings v6 and v4 to run again!

SETUP:
--------

WAN -> DS-Lite
   |
Fritzbox - 192.168.178.1/24
   |
OPNsense - 192.168.178.254/24 IPv6 PD /60 at WAN Interface
  |
LAN - 172.16.16.0/24


---
2022-02-16T13:19:43   Error   opnsense   /usr/local/etc/rc.routing_configure: The WAN_GW monitor address is empty, skipping.   
2022-02-16T13:19:43   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: keeping current default gateway '192.168.178.1'   
2022-02-16T13:19:43   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:19:43   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:19:43   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: entering configure using defaults   
2022-02-16T13:19:42   Error   opnsense   /usr/local/etc/rc.bootup: Resyncing OpenVPN instances.   
2022-02-16T13:19:40   Error   opnsense   /usr/local/etc/rc.bootup: The WAN_GW monitor address is empty, skipping.   
2022-02-16T13:19:40   Error   opnsense   /usr/local/etc/rc.bootup: ROUTING: creating /tmp/re0_defaultgw using '192.168.178.1'   
2022-02-16T13:19:40   Error   opnsense   /usr/local/etc/rc.bootup: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:19:40   Error   opnsense   /usr/local/etc/rc.bootup: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:19:40   Error   opnsense   /usr/local/etc/rc.bootup: ROUTING: entering configure using defaults   
2022-02-16T13:18:29   Error   opnsense   /interfaces.php: The command '/bin/pkill -'TERM' -F '/var/run/updaterrd.sh.pid'' returned exit code '3', the output was 'pkill: Cannot get process list (kvm_getprocs: No such process)'   
2022-02-16T13:18:29   Error   opnsense   /interfaces.php: The command '/usr/local/sbin/ntpd -g -c '/var/etc/ntpd.conf'' returned exit code '1', the output was ''   
2022-02-16T13:17:56   Error   opnsense   /interfaces.php: The WAN_GW monitor address is empty, skipping.   
2022-02-16T13:17:56   Error   opnsense   /interfaces.php: ROUTING: keeping current default gateway '192.168.178.1'   
2022-02-16T13:17:56   Error   opnsense   /interfaces.php: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:17:56   Error   opnsense   /interfaces.php: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:17:56   Error   opnsense   /interfaces.php: ROUTING: entering configure using defaults   
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: creating /tmp/re0_defaultgw using '192.168.178.1'   
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: removing /tmp/re0_defaultgw
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: removing /tmp/re0_defaultgw   
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:17:55   Error   opnsense   /interfaces.php: ROUTING: entering configure using 'wan'   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: The WAN_DHCP6 monitor address is empty, skipping.   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: The WAN_GW monitor address is empty, skipping.   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: skipping IPv6 default route   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: IPv6 default gateway set to wan   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: keeping current default gateway '192.168.178.1'   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: entering configure using defaults   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: skipping IPv6 default route   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: IPv6 default gateway set to wan   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: creating /tmp/re0_defaultgw using '192.168.178.1'   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: removing /tmp/re0_defaultgw   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: setting IPv4 default route to 192.168.178.1   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: IPv4 default gateway set to wan   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: ROUTING: entering configure using 'wan'   
2022-02-16T13:17:28   Error   opnsense   /interfaces.php: Accept router advertisements on interface re0

does anyone have the same problem or a tip?

cheers,
velvet

[seed]

Please update to 21.1.1 and check if the problem still exists.

[velvet]

the problem is after the update to 20.1.1. and the final reboot occurred again

UPDATE: if I reactivate v6 after the reboot, v4 and v6 work again!

UPDATE II: I have now installed the Realtek driver - now the problem seems to be fixed!


velvet