Upgrade to 21.1 may take *very* long time (>1h)

[thowe]

On the APU2E4, the update ran completely automatically and smooth in less than 10 minutes. Many thanks to all who contributed to this!

[4r7ur]

Upgraded two APU2C4, without issues. It took about 12 minutes each time.

[abraxxa]

Upgraded my Gigabyte GA-J3455N-D3H based firewall successfully, took about 80 seconds until it was pingable again.

[sot3]

Well I can't make the upgrade work.
It takes forever and when I give up and reboot the machine, it's untouched and still on 20.7.8_4.

When I go to the update page, I see this: (please see attachment)

Ideas?

I'm getting the same result upgrading from 21.1.b_140-amd64, except that I have 2 updates pending instead of 3.  When I attempt either update it seems to download and install and reboot but then boots to the same state.

How does one access this console?  When I ssh to the system I get a bash prompt.

[pablo]

Hi everyone,

I upgraded a VM before upgrading one of my GWs.  I monitored the Console and noticed one of the longest steps was the extraction of the new packages.  This takes CPU + I/O.

My GW upgrade time was four minutes.

Below is my write-time on the SSD gumstick:

Code: [Select]

# dd if=/dev/zero of=x bs=64k count=10000;rm x
10000+0 records in
10000+0 records out
655360000 bytes transferred in 1.967271 secs (333131472 bytes/sec)


[mullcom]

Hello!

It taket Long time for me also. Don't now but more then 1h after that I feel a sleep.