LACP WAN and LAN Issues

[DocHodges]

Hey guys I made the switch from PFSENSE yesterday and have the firewall setup as I had pfsense. All is running just fine and setup was smooth. The only issue I am having is with the LAGG setup for WAN. I know its really not needed but I am running a 4 port nic and might as well use two for WAN and 2 for LAN.

Setup Original: IGB0 - WAN IGB2 - LAN

Process used:
Delete Interface Assignment of IGB0
With interface now unassigned move to Other:LAGG and create a new interface type LACP using IGB0 and IGB1 and call it WAN LAGG.
Assign WAN LAGG and enable interface. IPV4 setup as DHCP and IPV6 setup as DHCPV6. Everything else left as default. (this seems to mirror the auto creation made during initial setup when not using LAGG)
Once completed I reboot the system.
Upon reboot the WAN can not determine the IP and I am left with 0.0.0.0 and unable to access the web GUI. This forced me into resetting to default and loading the saved config before the adjustments.

I am really not sure what I am doing wrong here as it seems this should be correct. Anyone from the community have any ideas on why this would be failing?