[Solved ] Bridging working except LAN to 'bridged LAN'

[pablo]

Hi!

I'm hoping I can get some direction on solving a bridging access problem.

Environment

I am double NATd:

• LAN is 192.168.10.0/24
• WAN is 10.8.0.0/24

Goal

• I would like to create a bridge between my WAN and two machines on the LAN.  Let's say they're 10.8.0.10 and 10.8.0.11
• I would like machines on the WAN to access the two machines on the LAN via their respective IP:  10.8.0.10 and 10.8.0.11
• From within my LAN, I'd like to access these two machines also by their 10.x.x.x addresses
• Similar to my LAN, I'd like the same from within my OPNsense gateway

Working

To keep things simple I decided to start with one machine.

I was able to created the bridge between the old WAN interface and a VLAN to access 10.8.0.10 from the bridged WAN:  ping, ssh all work.

Not working

The following two items are not working.  :\

• From within my LAN, I'd like to access these two machines also by their 10.x.x.x addresses
• Similar to my LAN, I'd like the same from within my OPNsense gateway

My gut tells me that I need to implement some NATing.

Any tips on what I should research?   All hints welcomed!  :)

Interfaces

• LAN - igb0 - 192.168.10.1/24
• WANBr - igb1
• INT_10_NET - igb2 - 192.168.24.1/24
• V99 - vlan 99 on igb2
• WAN - bridge0 - V99 + WANBr - 10.8.0.7/24

[pablo]

It seems using OPNsense as my test VM was not a good idea.  I tried Puppy Linux and everything is working like I expect.  Phew!

-pablo