VLAN Help (Solved)

[guyp2k]

I setup VLAN20 and assinged to my LAN interface, enabled, created DHCP scope, and created firewall rules under the VLAN20 interface named IOT.

The clients get a DHCP address in the correct network, 192.168.20.0/24,but I can't access the other VLAN or the internet. Looking at the firewall logs I see the following:
 
2020-09-05T15:51:57   filterlog[78388]   6,,,0,em1_vlan20,match,block,in,4,0x0,,128,20785,0,none,17,udp,64,192.168.20.100,192.168.20.1,65037,53,44

Here is the firewall rule I created just to test:

IPv4 *   IOT net   *   *   *   *   *

 
What am I missing?

Thanks

[banym]

Check the interface configuration if you have the "block private networks" checkbox enabled.

[guyp2k]

Check the interface configuration if you have the "block private networks" checkbox enabled.

Thanks for the reply, that box is unchecked.

[guyp2k]

Well after hours and hours of troubleshooting and clearing states, I rebooted all my APs, switch, and FW/OPNSense and now it's working 

No idea what was going on, any ideas?