Rebooted in installation OPNsense 20.7 in Proxmox 6.2

[uhernandez]

I have a problem with the installation of OPNsense 20.7 in Proxmox 6.2-10. It restarts before starting the installation and in /var/log/syslog in Proxmox, appears: SVM: KVM: Guest triggered AMD Erratum 383.

Try the OPNsense 20.1 installer but it also restarts, although it does so during file copying on installation.

I have Proxmox 6.2-10 on a HPE ProLiant MicroServer, with an AMD Turion (tm) II Neo N54L Dual-Core processor, 6 GB of RAM and 250 GB of disk.

I create the VM using 1 processor core, 1 GB of RAM and 10 GB of disk.

I tried what is suggested in [1]: Change CPU Type kmv64 to qemu64; test with UEFI BIOS (and create partition) instead of SeaBIOS; SCSI and IDE disk; i440fx and q35 machine; install amd64-microcode. I even reinstalled Proxmox to test with version 6.2-4, but none of this worked.

[1] https://forum.opnsense.org/index.php?topic=13237.0

In contrast, pfSense Community 2.4.5 installs without problem in Proxmox 6.2-10.

Any solution ideas?

[qinohe]

Hi there, running almost the same setup, though, I am running default cpu(kvm64) 2 cores, 4GB ram and 32GB HD machine type i440fx(default), my Proxmox version is 6.2-10. This setup runs on OVMF, UEFI. It's running on a Supermicro-A2SDi-HLN4F(3758) for about 2 months now, I have a few minor issues I'm still investigating, but it runs for weeks without major problems.

You could try a little more ram, though, 512MB should even be enough(bare metal).
Did you try to set it up with cpu(kvm64)? you said you changed it but not if you tested it 
Which ISO did you use? - this one I used..(OPNsense-20.1-OpenSSL-dvd-amd64.iso)

The notification(SVM: KVM: Guest triggered AMD Erratum 383) seems to exist for a while.. I don't know if there are solutions to implement on Proxmox or the OPNsense VM, maybe someone else has an idea about this.

I also scanned trough the post(s) you linked to, but I don't recognize my setup in this, fiber 1G speed is about reached, I did not intensively test everything since all my machines and connection are quite new;)

Greetings, mark

[iloleg]

I have the same problem with new installation OPNsense 20.7 in Proxmox 6.2-11.
Previous version OPNsense 20.1 starts normal, but when upgrade to 20.7 again reboots in circle. U can see the last message before reboot in attachment.

[qinohe]

Hi, still running without any issues on 6.2-11..
I would say something is different on your installations than on mine...
Is your disk 'VirtIO SCSI'?

BTW: 'Use tablet for pointer:  no' 

Greetings, mark