Upgrade from 20.1 to 20.7 keeps failing

[gknux]

I have been running OPNsense for a while no without any issues but when i upgraded from 20.1 to 20.7 it seems to install, then reboots, but starts back up in 20.1 :

Code: [Select]

Proceed with this action? [20.7/y/N]: 20.7

Fetching packages-20.7-OpenSSL-amd64.tar: ... done
Fetching base-20.7-amd64.txz: ... done
Fetching kernel-20.7-amd64.txz: ....................... done
!!!!!!!!!!!! ATTENTION !!!!!!!!!!!!!!!
! A critical upgrade is in progress. !
! Please do not turn off the system. !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Extracting packages-20.7-OpenSSL-amd64.tar... done
Extracting base-20.7-amd64.txz... done
Installing kernel-20.7-amd64.txz... done
Please reboot.
>>> Invoking stop script 'beep'
>>> Invoking stop script 'freebsd'
flowd_aggregate not running? (check /var/run/flowd_aggregate.pid).
Stopping flowd.
Waiting for PIDS: 40745 86058.
>>> Invoking stop script 'backup'
>>> Invoking backup script 'captiveportal'
>>> Invoking backup script 'dhcpleases'
>>> Invoking backup script 'duid'
>>> Invoking backup script 'netflow'
>>> Invoking backup script 'rrd'
>>> Invoking stop script 'config'
Shutdown NOW!
shutdown: [pid 7519]

*** FINAL System shutdown message from root@OPNsense ***

System going down IMMEDIATELY

System shutdown time has arrived

and once it starts back up :

Code: [Select]

Last login: Sun Nov 22 04:09:39 2020 from
----------------------------------------------
|      Hello, this is OPNsense 20.1          |         @@@@@@@@@@@@@@@
|                                            |        @@@@         @@@@
| Website:      https://opnsense.org/        |         @@@\\\   ///@@@
| Handbook:     https://docs.opnsense.org/   |       ))))))))   ((((((((
| Forums:       https://forum.opnsense.org/  |         @@@///   \\\@@@
| Lists:        https://lists.opnsense.org/  |        @@@@         @@@@
| Code:         https://github.com/opnsense  |         @@@@@@@@@@@@@@@
----------------------------------------------

*** OPNsense: OPNsense 20.1.9_1 (amd64/OpenSSL) ***


I have been digging through as many posts as possible to try and debug but have gotten to the point that i just have to ask.

Any ideas ?

[cmdr.adama]

I'm sure someone else would have asked it but can you provide more details on your setup, hardware, logs, etc.

Worst case scenario are you able to take a backup, flatten it, install 20.7 fresh and restore from backup?

[franco]

Can you please post your /var/cache/opnsense-update/.upgrade.log


Thanks,
Franco