Configure OPNsense has default gateway only with LAN interface

[daxrob]

Hi,

I have a small PC with only one interface where I would like to install OPNsense. I would like to know if and how is possible to configure it to be the network default gateway and check all the connection between LAN and WAN.

clients -> LAN 10.1.1.0/24 -> OPNsense -> LAN 192.168.0.0/24 -> Internet

Thanks
Roberto

[franco]

You need to work with VLANs if you only have one port but want a WAN and LAN and for this you probably also need a VLAN-capable switch.


Cheers,
Franco