Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Dual WAN + Traffic Shaping
« previous
next »
Print
Pages: [
1
]
Author
Topic: Dual WAN + Traffic Shaping (Read 22087 times)
snakeaj
Newbie
Posts: 15
Karma: 0
Dual WAN + Traffic Shaping
«
on:
December 24, 2016, 01:27:59 pm »
Hello!
I wan to use Dual WAN (DSL + 4G) and limit bandtwith for each user to 4 Mbit down and 1 Mbit up.
My Problem: in traffic Shaping i can only use an INTERFACE (wan1 or wan2) and not my WAN GROUP.
one more thing i noticed: i can not find "Sticky Connection" which i want to set (Multi WAN howto)
thx
alexander
OPNsense 16.7.11_1-amd64
FreeBSD 10.3-RELEASE-p14
OpenSSL 1.0.2j 26 Sep 2016
Logged
rackg
Jr. Member
Posts: 68
Karma: 3
Ethical hacker
Re: Dual WAN + Traffic Shaping
«
Reply #1 on:
December 25, 2016, 09:51:17 am »
Hello Alexander,
I still have the issue. You can check this out
https://forum.opnsense.org/index.php?topic=3856.msg13582#msg13582
. My issue was same on similar setup.
Logged
-RackG
HFsi
Newbie
Posts: 36
Karma: 3
Re: Dual WAN + Traffic Shaping
«
Reply #2 on:
September 19, 2017, 11:55:17 pm »
It seems that the issue will see another christmas...I´m stuck with the same problem...
Logged
mimugmail
Hero Member
Posts: 6753
Karma: 494
Re: Dual WAN + Traffic Shaping
«
Reply #3 on:
September 20, 2017, 06:14:27 am »
I haven't tested it yet but I'd create two pipes, each for 1 WAN, 2 queues for each WAN pointing to their pipes and then create rules pointing to the queues in advanced mode with both interfaces (IN+OUT)
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
franco
Administrator
Hero Member
Posts: 17276
Karma: 1569
Re: Dual WAN + Traffic Shaping
«
Reply #4 on:
September 20, 2017, 07:49:20 am »
Quote from: HFsi on September 19, 2017, 11:55:17 pm
It seems that the issue will see another christmas...I´m stuck with the same problem...
It is unclear what the "same" issue could be. There is a lot of time between Christmas 2016 and 2017.
Cheers,
Franco
Logged
HFsi
Newbie
Posts: 36
Karma: 3
Re: Dual WAN + Traffic Shaping
«
Reply #5 on:
September 22, 2017, 04:25:45 pm »
Hi Franco!
The "same issue" would be that in traffic Shaping I can only use an INTERFACE (wan1 or wan2) and not my WAN GROUP.
So if one WAN goes down the shaping stops working, wright?
And I want to take the opportunity to thank you people for integrating ClamAV as a plugin!
«
Last Edit: September 22, 2017, 04:31:27 pm by HFsi
»
Logged
mimugmail
Hero Member
Posts: 6753
Karma: 494
Re: Dual WAN + Traffic Shaping
«
Reply #6 on:
September 22, 2017, 05:48:04 pm »
It doesnt make sense to use a Wan group as bandwith amd latency differ for most connections. Just create multiple pipes and rules.
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
franco
Administrator
Hero Member
Posts: 17276
Karma: 1569
Re: Dual WAN + Traffic Shaping
«
Reply #7 on:
September 22, 2017, 07:31:15 pm »
Hi there,
GW Groups are abstractions of one underlying firewall in FreeBSD: pf
Traffic shaping works using another firewall in FreeBSD better suited for the task: ipfw
Both only share the knowledge of individual interfaces unless LAGG is used. What is the downside of managing both interfaces independently in traffic shaping? They only apply in a physical scope with its own boundaries like Michael said.
If there is trouble with multi-wan shaping not working in general, make sure you have shared forwarding turned on (Firewall: Settings: Advanced).
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Dual WAN + Traffic Shaping