Author Topic: [SOLVED] Floating Rules Not Working (Read 4917 times)

HFsi · « **on:** July 05, 2017, 07:10:49 pm »

Hi guys!
I´ve a problem with floating rules, it simply doesn´t work....
The rule is attached.
From any interface I can ping that individual IP...
Any ideas?
Thanks

kyferez · « **Reply #1 on:** July 06, 2017, 06:11:24 pm »

I assume you applied the rule after creating it?

Other than that possibility, the rule looks correct. Edit the rule to allow logging and apply it. Then check the logs.

If you do not see logs of it being blocked, then use the Interfaces->Diagnostics->Packet Capture option to get a trace of icmp packets only and check the trace to ensure you see that icmp traffic hitting the firewall.

HFsi · « **Reply #2 on:** July 11, 2017, 04:58:53 am »

I solved.
The thing was that I have Lists created as Virtual IPs, for some reason one of that lists stop working, so when OPN reaches that specific rule, it stops working and disregards any other that is below...
Disabling that rule makes the others work fine.
This behavior could be considered as a bug?

Author Topic: [SOLVED] Floating Rules Not Working (Read 4917 times)

HFsi

[SOLVED] Floating Rules Not Working

kyferez

Re: Floating Rules Not Working

HFsi

Re: Floating Rules Not Working