Protectli VP-6630 Sporadic hard locks on 26.7.x

Started by cynthrune, October 29, 2026, 05:47:17 PM

Previous topic - Next topic
Starting a thread here.
So far the symptoms are:
Occasionally after anywhere between 12-72 hours my Protectli VP-6630 will hard lock itself, console output will be a primarily black screen with brief, corrupted looking flashes of the console screen appearing. the device will be unresponsive on all interfaces and the fans will lock to 100%. After performing a cold boot there are zero traces of logs indicating that anything went wrong. The system was fine prior to an upgrade to 26.7 (from 26.1) and while that admittedly potentially went wrong (due to not performing the microcode steps) the system has been fully reinstalled since that point.

There exists a thread in the 26.7 subforum for an issue with the FW6, but the proposed solution there did not help. I was running the Coreboot bios prior, but have swapped to the AMI one, without it resolving the issue.

I will update this thread as I encounter anything new. If anyone has any suggestions for things to try, please.

So you have uninstalled the microcode plugin?
potatonetworks.com

Quote from: sopex on October 29, 2026, 06:08:34 PMSo you have uninstalled the microcode plugin?
The issue has occurred both with the microcode plugin present, and without


The microcode update was not the root cause of the problems many people had. The old bootloader was.

There are threads which show how to update it.
Intel N100, 4* I226-V, 2* 82559, 16 GByte, 500 GByte NVME, Leox LXT-010H-D

1100 down / 450 up, Bufferbloat A+

Quote from: meyergru on October 29, 2026, 06:21:47 PMThe microcode update was not the root cause of the problems many people had. The old bootloader was.

There are threads which show how to update it.
Regardless I would presume freshly reinstalling 26.7 would also deal with the bootloader being broken?

Quote from: cynthrune on October 29, 2026, 06:48:49 PMRegardless I would presume freshly reinstalling 26.7 would also deal with the bootloader being broken?
Yes, because you immediately use the newest one.

But this :
Quote from: cynthrune on October 29, 2026, 05:47:17 PMSo far the symptoms are:
Occasionally after anywhere between 12-72 hours my Protectli VP-6630 will hard lock itself, console output will be a primarily black screen with brief, corrupted looking flashes of the console screen appearing. the device will be unresponsive on all interfaces and the fans will lock to 100%.
Suggests you have got bigger problems!

- Check the PSU/Adapter of the device.
- Run memtest86+ for 24 hours.
- Boot some kind of regular OS and do some tests that put high load on the machine and see what happens...

Good luck! :)
Weird guy who likes everything Linux and *BSD on PC/Laptop/Tablet/Mobile and funny little ARM based boards :)

So, it's been a bit since I've done any followups.
memtest86+ did one complete run, passed. Unsure if I should run more of them or for longer though?
bought a new power adapter (is also PSU for these things), which was also plugged into a UPS. This also did not solve it.
we put artificial load on the system, pinning the CPU to 100% for around 2 minutes, not fully adqeuate for a full test but it would put more overall load than we would normally observe. ran fine, this also pushed temps higher than we would see during normal operation.

Quote from: cynthrune on November 20, 2026, 10:28:30 PMmemtest86+ did one complete run, passed. Unsure if I should run more of them or for longer though?

we put artificial load on the system, pinning the CPU to 100% for around 2 minutes, not fully adqeuate for a full test but it would put more overall load than we would normally observe. ran fine, this also pushed temps higher than we would see during normal operation.
Push those two for at least 24 hours and see what happens :)
Weird guy who likes everything Linux and *BSD on PC/Laptop/Tablet/Mobile and funny little ARM based boards :)