Tayga setup issues

[teb]

I followed the instructions here: https://github.com/opnsense/docs/blob/master/source/manual/how-tos/tayga.rst, and configured Tayga, the normalizer, the inbound allow all for the tayga interface, and outbound NAT firewall rules. 


I have a /60 from my ISP, let's say it's 1111:2222:3333:2010::/60
My setup is as such:

IPV4 Address: 192.168.240.1
IPv4 NAT64 Interface Address: 192.168.239.255
IPv6 Address: ---
IPv6 NAT64 Interface Address: 1111:2222:3333:2010::6464
IPv6 Prefix: 1111:2222:3333:201f::/96
IPv4 Pool: 192.168.240.0/20
Custom Routing: False

If I traceroute to 1111:2222:3333:201f:1.1.1.1, I get the following:

Code Select Expand

traceroute6 to 1111:2222:3333:201f::1.1.1.1 (1111:2222:3333:201f::101:101) from 1111:2222:333:2010::6464, 64 hops max, 28 byte packets
 1  1111:2222:3333:201f::c0a8:f001  0.148 ms  0.083 ms  0.033 ms
 2  1111:2222:3333:201f::c0a8:efff  0.066 ms  0.209 ms  0.135 ms
 3  * * *
 4  * * *
 5  * * *

So it looks like it's doing all the right things to generate the right IPs, but it's not sending things out.  I have been racking my brain for 2 days on this.  I even followed this video: https://youtu.be/WZSdpY_VgyY?si=9A_WJJJp1J-IdZnW, and followed to a tee (minus the ipv6 address he uses), and I got the same result. 

Any help would be greatly appreciated.  TIA!

-Travis