No PPPoE connection in 25.1.5_5

Started by verfluchten, May 06, 2025, 07:50:36 PM

Previous topic - Next topic
It would not connect even though it is configured same as my production router. Everything is set up exactly the same, only the drive is being swapped. The same interfaces, assignments, devices, credentials, everything is exactly the same, but the PPPoE interface stays down. Also, the services widget in the lobby fails to load, then loads briefly, and blanks out with the same error message again. This is not very encouraging of the 25.1.

Please delete the same thread from General where it's not getting noticed.

May 07, 2025, 04:27:47 AM #1 Last Edit: May 07, 2025, 04:34:18 AM by hharry
i'm running several OPNsense 25.1.5_5-amd64 instances with PPPoE and zero issues whatsoever, i also perform PPPoE functionality and performance LAB testing, before upgrading production.

I'd suggest you run an audit check on your deployment...

Also you should investigate the system logs in System: Log Files: General, and add the filer=ppp with severity=notice....
OPNsense 25.1.7_4-amd64 running on ESXi 6.7 U2 VM, 4Gbytes RAM, 2 x vCPU
Basic non-complex install with frr, IDS and sftp-backup plugins


Quote from: verfluchten on May 08, 2025, 01:22:05 AM
Quote from: hharry on May 07, 2025, 04:27:47 AMan audit check
What is that?

Navigate to System: Firmware, and click on the Audit button -> Health

Did you also check the system logs ?
OPNsense 25.1.7_4-amd64 running on ESXi 6.7 U2 VM, 4Gbytes RAM, 2 x vCPU
Basic non-complex install with frr, IDS and sftp-backup plugins

Quote from: hharry on May 08, 2025, 03:18:48 AMNavigate to System: Firmware, and click on the Audit button -> Health
Firmware drops down another menu. Could you share a screenshot with the path to the Audit button?

Quote from: verfluchten on May 08, 2025, 12:28:42 PM
Quote from: hharry on May 08, 2025, 03:18:48 AMNavigate to System: Firmware, and click on the Audit button -> Health
Firmware drops down another menu. Could you share a screenshot with the path to the Audit button?

OPNsense 25.1.7_4-amd64 running on ESXi 6.7 U2 VM, 4Gbytes RAM, 2 x vCPU
Basic non-complex install with frr, IDS and sftp-backup plugins

***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 25.1.5_5 (amd64) at Fri May  9 2026
>>> Root file system: /dev/ada0s1a
>>> Check installed kernel version
Version 25.1.5 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 25.1.5 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check installed repositories
OPNsense (Priority: 11)
mimugmail (Priority: 5)
>>> Check installed plugins
os-adguardhome-maxit 1.15
os-sftp-backup 1.1
os-smart 2.3
os-upnp 1.7
>>> Check locked packages
No locks found.
>>> Check for missing package dependencies
Checking all packages: .......... done
>>> Check for missing or altered package files
Checking all packages: .......... done
>>> Check for core packages consistency
Core package "opnsense" at 25.1.5_5 has 70 dependencies to check.
Checking packages: .
beep-1.0_2 has no upstream equivalent
Checking packages: .
ca_root_nss-3.108 has no upstream equivalent
Checking packages: .
choparp-20150613_1 has no upstream equivalent
Checking packages: .
cpustats-0.1 has no upstream equivalent
Checking packages: .
dhcp6c-20241008 has no upstream equivalent
Checking packages: .
dhcrelay-1.0 has no upstream equivalent
Checking packages: .
dnsmasq-2.91,1 has no upstream equivalent
Checking packages: .
dpinger-3.3 has no upstream equivalent
Checking packages: .
expiretable-0.6_3 has no upstream equivalent
Checking packages: .
filterlog-0.7_1 has no upstream equivalent
Checking packages: .
flock-2.37.2_1 has no upstream equivalent
Checking packages: .
flowd-0.9.1_5 has no upstream equivalent
Checking packages: .
hostapd-2.11_2 has no upstream equivalent
Checking packages: .
ifinfo-13.0_1 has no upstream equivalent
Checking packages: .
iftop-1.0.p4_1 has no upstream equivalent
Checking packages: .
isc-dhcp44-server-4.4.3P1_2 has no upstream equivalent
Checking packages: .
kea-2.6.1_2 has no upstream equivalent
Checking packages: .
lighttpd-1.4.79 has no upstream equivalent
Checking packages: .
monit-5.34.4 has no upstream equivalent
Checking packages: .
mpd5-5.9_19 has no upstream equivalent
Checking packages: .
ntp-4.2.8p18_4 has no upstream equivalent
Checking packages: .
openssh-portable-9.9.p2_1,1 has no upstream equivalent
Checking packages: .
openvpn-2.6.14 has no upstream equivalent
Checking packages: .
opnsense-25.1.5_5 has no upstream equivalent
Checking packages: .
opnsense-installer-25.1 has no upstream equivalent
Checking packages: .
opnsense-lang-25.1 has no upstream equivalent
Checking packages: .
opnsense-update-25.1.5 has no upstream equivalent
Checking packages: .
pam_opnsense-24.1 has no upstream equivalent
Checking packages: .
pftop-0.12 has no upstream equivalent
Checking packages: .
php83-ctype-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-curl-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-dom-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-filter-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-gettext-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-google-api-php-client-2.4.0 has no upstream equivalent
Checking packages: .
php83-ldap-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-pcntl-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-pdo-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-pear-Crypt_CHAP-1.5.0_1 has no upstream equivalent
Checking packages: .
php83-pecl-radius-1.4.0b1_3 has no upstream equivalent
Checking packages: .
php83-phalcon-5.9.2 has no upstream equivalent
Checking packages: .
php83-phpseclib-3.0.42 has no upstream equivalent
Checking packages: .
php83-session-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-simplexml-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-sockets-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-sqlite3-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-xml-8.3.19_1 has no upstream equivalent
Checking packages: .
php83-zlib-8.3.19_1 has no upstream equivalent
Checking packages: .
pkg-1.19.2_5 has no upstream equivalent
Checking packages: .
py311-Jinja2-3.1.6 has no upstream equivalent
Checking packages: .
py311-dnspython-2.7.0,1 has no upstream equivalent
Checking packages: .
py311-duckdb-1.2.2 has no upstream equivalent
Checking packages: .
py311-jq-1.8.0_1 has no upstream equivalent
Checking packages: .
py311-ldap3-2.9.1_1 has no upstream equivalent
Checking packages: .
py311-netaddr-1.3.0 has no upstream equivalent
Checking packages: .
py311-numpy-1.26.4_6,1 has no upstream equivalent
Checking packages: .
py311-pandas-2.1.4,1 has no upstream equivalent
Checking packages: .
py311-requests-2.32.3 has no upstream equivalent
Checking packages: .
py311-sqlite3-3.11.11_10 has no upstream equivalent
Checking packages: .
py311-ujson-5.10.0_1 has no upstream equivalent
Checking packages: .
py311-vici-5.9.11_1 has no upstream equivalent
Checking packages: .
radvd-2.20 has no upstream equivalent
Checking packages: .
rrdtool-1.9.0 has no upstream equivalent
Checking packages: .
samplicator-1.3.8.r1_1 has no upstream equivalent
Checking packages: .
strongswan-5.9.14 has no upstream equivalent
Checking packages: .
sudo-1.9.16p2_1 has no upstream equivalent
Checking packages: .
suricata-7.0.10 has no upstream equivalent
Checking packages: .
syslog-ng-4.8.1_5 has no upstream equivalent
Checking packages: .
unbound-1.22.0_1 has no upstream equivalent
Checking packages: .
wpa_supplicant-2.11_4 has no upstream equivalent
Checking packages: .
zip-3.0_4 has no upstream equivalent
***DONE***

i assume your OPNsense deployment has only 1 x WAN G/W, the PPPoE interface.

This would explain the package has no upstream equivalent messages, as OPNsense needs INET connectivity to perform the complete health check.

What did you find in the system logs in System: Log Files: General, and add the filer=ppp with severity=notice....
OPNsense 25.1.7_4-amd64 running on ESXi 6.7 U2 VM, 4Gbytes RAM, 2 x vCPU
Basic non-complex install with frr, IDS and sftp-backup plugins