After Update to 25.1.1 unexpected firewall restarts without any log entry

Started by SerErris, February 13, 2025, 11:44:54 PM

Previous topic - Next topic
Unfortunately, we have the same problem.
Our OPNsense appliance runs on physical hardware in an HA construct.
Since the upgrade to 25.1.x, both devices reboot sporadically.
The primary appliance has already been completely reinstalled to rule this out as the cause.
ZenArmor and Suricata have also been deactivated to rule out this as the cause of the reboots.


/var/crash/info.0:
Dump header from device: /dev/ada0p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 155648
  Blocksize: 512
  Compression: none
  Dumptime: 2025-03-20 09:56:08 +0100
  Hostname: FW221201.karcoma.net
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 14.2-RELEASE-p2 stable/25.1-n269701-7c59d89f8cd SMP
  Panic String: page fault
  Dump Parity: 1955918881
  Bounds: 0
  Dump Status: good


I hope someone can help.

Kind regards,
Dominique
Intel Xeon D-1518 4-Core 2,20GHz 6MB
32 GB (2x 16GB) ECC DDR4 2933 RAM
960 GB SATA III Samsung SSD 3D-NAND TLC 2,5" (PM893)
Broadcom 25 Gigabit P225P SFP28 Dual Port

Again, same question: Microcode updates applied?
Intel N100, 4 x I226-V, 16 GByte, 256 GByte NVME, ZTE F6005

1100 down / 800 up, Bufferbloat A+

Quote from: meyergru on March 20, 2025, 10:38:34 AMAgain, same question: Microcode updates applied?
Yes, cpu-microcode-intel is installed.
Intel Xeon D-1518 4-Core 2,20GHz 6MB
32 GB (2x 16GB) ECC DDR4 2933 RAM
960 GB SATA III Samsung SSD 3D-NAND TLC 2,5" (PM893)
Broadcom 25 Gigabit P225P SFP28 Dual Port