intel x520-da2 & HSGQ Xpon Stick

[bunneo]

hey,

ive setup opnsense on CWWK mini pc with intel x520-da2, unlocked to accept all modules. i am trying to get this HSGQ Xpon stick to get recognised. but it is not working, the link lights doesnt turn up, ifconfig shows no carrier

Code Select Expand

Value cat /proc/kmsg Mode Behavior ethtool Note
0 <4>change mode to 0(GE/FE PHY) TP 1GbaseT/100baseT 0x020 DFP-34X-2C2 Auto Detect
1 <4>change mode to 1(Fiber 1G) FIBER 1GbaseX 0x20000000000 V2801F Default
2 <4>change mode to 2(SGMII PHY) TP MII 1Gb PHY TWCGPON657 Default
3 <4>change mode to 3(SGMII MAC) MII 1Gb MAC DFP-34X-2C2 Default
4 <4>change mode to 4(HiSGMII PHY) TP MII 2.5Gb PHY
5 <4>change mode to 5(HiSGMII MAC) MII 2.5Gb MAC
6 <4>change mode to 6(2500BaseX) FIBER 2500baseX 0x8000
7 <4>change mode to 7(SGMII Force) TP? 1GbaseT DFP-34X-2C2

ive tried changing the sticks, speed to different ones also.
currently connecting the stick to tplink media converter which then connects to OPNsense.
is there something i am missing?
thanks..

[MartB]

Same problem but with a different GPON stick (LEOX LXT-010S-H).
Did you find any solution?

[douteiful]

Hi, sorry for the necro but I also have this exact same card (Intel X520-da2) and same module (DFP-34X-2C2) and it won't work even though the card is already unlocked for all vendors. It says the module is not supported. Did you get to make it work?

Same problem but with a different GPON stick (LEOX LXT-010S-H).

I was about to buy the LEOX LXT-010S-H so thanks for the warning.
Maybe it's because they use the same Realtek chip.

I bought a GPON-ONU-34-20BI since it uses a different chip (Zentiq) to see if it works with the X520. I'll update the post accordingly.