No WAN after upgrade to 24.4

[thyrex]

Hello,
I upgraded the firmware on my DEC2750 yesterday to version 24.4 and after reboot i was not able to get an IP on the WAN.
I'm using one of the SFP ports (ax1) with a RJ45 adaptador (1G SFP RJ45 Mini-Gbic Module ASF-GE-T from 10Gtek) and the RJ45 ports for the LAN. I have no problem on LAN.

I have try to get an ip from a router dhcp on the other SFP (ax0) and same problem. So i set a static IP to this ax0 and set some route to ping 8.8.8.8 without success. Can't ping the router.

Any help is welcome.

Here is the logs when i remove and insert the SFP adaptators:

Code Select Expand

<13>1 2024-05-03T16:25:45+02:00 host.domain.lan kernel - - [meta sequenceId="5057"] <6>ax1: link state changed to DOWN
<13>1 2024-05-03T16:25:45+02:00 host.domain.lan kernel - - [meta sequenceId="5058"] <6>ax1_vlan100: link state changed to DOWN
<13>1 2024-05-03T16:25:45+02:00 host.domain.lan opnsense-business 33050 - [meta sequenceId="5059"] /usr/local/etc/rc.linkup: DEVD: Ethernet detached event for opt14(ax1)
<27>1 2024-05-03T16:25:45+02:00 host.domain.lan dhclient 78820 - [meta sequenceId="5060"] connection closed
<26>1 2024-05-03T16:25:45+02:00 host.domain.lan dhclient 78820 - [meta sequenceId="5061"] exiting.
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5062"] ax1: xgbe_phy_sfp_signals: port_sfp_inputs: 0x7
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5063"] ax1: xgbe_phy_sfp_detect: mod absent
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5064"] e1000phy1: detached
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5065"] miibus1: detached
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5066"] ax1: xgbe_phy_sfp_signals: port_sfp_inputs: 0x0
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5067"] ax1: SFP detected:
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5068"] ax1:   vendor:     OEM
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5069"] ax1:   part number:    SFP-GE-T
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5070"] ax1:   revision level:
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5071"] ax1:   serial number:  CSGE1L83291
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5072"] miibus1: <MII bus> on ax1
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5073"] e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus1
<13>1 2024-05-03T16:25:57+02:00 host.domain.lan kernel - - [meta sequenceId="5074"] e1000phy1:  none, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
<13>1 2024-05-03T16:26:10+02:00 host.domain.lan opnsense-business 78838 - [meta sequenceId="5075"] /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for opt14(ax1)
<13>1 2024-05-03T16:26:10+02:00 host.domain.lan kernel - - [meta sequenceId="5076"] <6>ax1: link state changed to UP
<13>1 2024-05-03T16:26:10+02:00 host.domain.lan kernel - - [meta sequenceId="5077"] <6>ax1_vlan100: link state changed to UP
<13>1 2024-05-03T16:26:10+02:00 host.domain.lan kernel - - [meta sequenceId="5078"] ax1: Link is UP - 1Gbps/Full - flow control off
<13>1 2024-05-03T16:26:10+02:00 host.domain.lan dhclient 84709 - [meta sequenceId="5079"] dhclient-script: Reason PREINIT on ax1 executing
<27>1 2024-05-03T16:26:10+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5080"] send_packet: No buffer space available
<27>1 2024-05-03T16:26:11+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5081"] send_packet: No buffer space available
<27>1 2024-05-03T16:26:12+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5082"] send_packet: No buffer space available
<27>1 2024-05-03T16:26:13+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5083"] send_packet: No buffer space available
<27>1 2024-05-03T16:26:14+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5084"] send_packet: No buffer space available
<27>1 2024-05-03T16:26:15+02:00 host.domain.lan dhclient 82161 - [meta sequenceId="5085"] send_packet: No buffer space available



<13>1 2024-05-03T16:33:49+02:00 host.domain.lan opnsense-business 48550 - [meta sequenceId="31"] /usr/local/etc/rc.linkup: DEVD: Ethernet detached event for opt15(ax0)
<27>1 2024-05-03T16:33:49+02:00 host.domain.lan dhclient 55770 - [meta sequenceId="32"] connection closed
<26>1 2024-05-03T16:33:49+02:00 host.domain.lan dhclient 55770 - [meta sequenceId="33"] exiting.
<13>1 2024-05-03T16:33:49+02:00 host.domain.lan kernel - - [meta sequenceId="34"] <6>ax0: link state changed to DOWN
<27>1 2024-05-03T16:33:54+02:00 host.domain.lan dhclient 97704 - [meta sequenceId="35"] send_packet: No buffer space available
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="36"] ax0: xgbe_phy_sfp_signals: port_sfp_inputs: 0x7
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="37"] ax0: xgbe_phy_sfp_detect: mod absent
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="38"] e1000phy0: detached
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="39"] miibus0: detached
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="40"] ax0: xgbe_phy_sfp_signals: port_sfp_inputs: 0x0
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="41"] ax0: SFP detected:
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="42"] ax0:   vendor:       OEM
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="43"] ax0:   part number:    SFP-GE-T
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="44"] ax0:   revision level:
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="45"] ax0:   serial number:  CSGE1L83292
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="46"] miibus0: <MII bus> on ax0
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="47"] e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
<13>1 2024-05-03T16:33:55+02:00 host.domain.lan kernel - - [meta sequenceId="48"] e1000phy0:  none, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
<13>1 2024-05-03T16:34:02+02:00 host.domain.lan opnsense-business 50727 - [meta sequenceId="49"] /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for opt15(ax0)
<13>1 2024-05-03T16:34:02+02:00 host.domain.lan kernel - - [meta sequenceId="50"] <6>ax0: link state changed to UP
<13>1 2024-05-03T16:34:02+02:00 host.domain.lan kernel - - [meta sequenceId="51"] ax0: Link is UP - 1Gbps/Full - flow control off
<13>1 2024-05-03T16:34:02+02:00 host.domain.lan dhclient 55050 - [meta sequenceId="52"] dhclient-script: Reason PREINIT on ax0 executing
<13>1 2024-05-03T16:34:06+02:00 host.domain.lan dhclient 65530 - [meta sequenceId="53"] dhclient-script: Reason FAIL on ax1 executing
<27>1 2024-05-03T16:34:21+02:00 host.domain.lan dhclient 97704 - [meta sequenceId="54"] send_packet: No buffer space available
<27>1 2024-05-03T16:34:23+02:00 host.domain.lan dhclient 97704 - [meta sequenceId="55"] send_packet: No buffer space available
<27>1 2024-05-03T16:34:28+02:00 host.domain.lan dhclient 97704 - [meta sequenceId="56"] send_packet: No buffer space available

[franco]

So the SFPs (non-plus) are not very reliable but in order to diagnose I'd try to boot from kernel.old via the boot loader menu to see if it comes back or not.


Cheers,
Franco

[itngo]

We had also issues after upgrade to 24.4 with 2 of about 40 Firewalls. One DEC2xxx and one virtual.

The had not loaded their interfaces and where not reachable.
Both could be fixed by just doing another reboot....

[franco]

@itngo Got any console output from these bad boot attempts?


Cheers,
Franco

[thyrex]

Hello,
Got some news.
I changed the SFP adaptator for a SFP+ and guess what... interface is working again !
Thank you for the help.

[itngo]

@itngo Got any console output from these bad boot attempts?


Cheers,
Franco

We did not follow up on this furthermore, as another reboot did fix.
We had this with 2 or 3 virtuak opnsense also the last Update 24.4.2 Business.... there it was enough to use "restart all services" on console to fix the issue....