24.7.1 - Health Graphics showing partial data

[EvilAchmed]

Since upgrading to 24.7 I noticed an issue with all of the Health Reporting Graphic's showing partial data.  I was hoping that the update to 24.7.1 would have fixed this issue but since it did not I thought that I would post something.  Please see the attached screenshot.  As you can see during the reported time data is missing, almost like the something stops collecting the data and then it starts back up again.  I have confirmed that this is happening on two of my friends OPNsense Firewalls as well, so it looks like a bug somewhere.  Just posting to make sure someone is aware so a fix can be issued.

Thanks for all the hard work on the release of 24.7.  I do think the new dashboard is pretty cool.

[ProximusAl]

I had this on upgrade to 24.7 and 24.7.1.

Had to reset RRD data and now working again.

[EvilAchmed]

I had this on upgrade to 24.7 and 24.7.1.

Had to reset RRD data and now working again.

I reset RRD after upgrading to 24.7.1 and it is still happening.  Give it some time and check your graph’s again.  I am sure that you will see missing data.

[EvilAchmed]

I had this on upgrade to 24.7 and 24.7.1.

Had to reset RRD data and now working again.

I reset RRD data again on my Production Firewall.  I also reset RRD data on my test OPNsense Firewall.  I have not seen any new data for the last 20 minutes since the reset.

For this to happen on two different boxes running the same version, has to be a bug.  One of my friend's also confirmed the same thing on his Firewall.  He is also running 24.7.1.

[ProximusAl]

Nope…..all my data is there over the last 3 hours since I reset RRD.

No gaps

[EvilAchmed]

Nope…..all my data is there over the last 3 hours since I reset RRD.

No gaps

Well like I said for it to be happening on two different pieces of hardware that have fresh installs of 24.7.1 as well as one of my friends I don't see how this can be a configuration or hardware issue.  By fresh I mean that I installed 24.7_5 fresh and upgraded to 24.7.1 before uploading my configuration.  My test system is just running bare bones with one WAN and one LAN port. 

After resetting for a third time, the graphic has not updated since 14:39.  It is now 15:09.

This was working with no issues on 24.1.10_8.  Only happened when I upgraded to 24.7.  Has to be a bug.

Please advise.

[EvilAchmed]

I performed some additional troubleshooting with no success.  Here is what I tried.

Under Reporting > Settings
1.) Uncheck "Enables the RRD graphing backend."
2.) Click Save
3.) Click Reset RRD Data and accept.
4.) Check "Enables the RRD graphing backend."

For the first 10 minutes I see data and then a gap for 36 minutes.  Then it's fine for 50 minutes and now I have not seen any data for 10 minutes.

I am running on a brand new Protectli Vault Firewall Appliance.

I am out of idea's.  If anyone can assist I would greatly appreciate it.

[meyergru]

I see this too. I did not try to repair anything yet, but I see gaps in the reported data.