Easiest way to change vom Interface to VLAN

[pleibling]

Hi there,

i want to use ZenArmor on my Home Firewall. On this Firewall i have LAN (igb8) and WAN (igb9) and multiple vlans (vlan.xx) on igb8.

But ZenArmor doesn't support to mix vlans and interfaces - so i have to change the two interfaces to vlans. But there are many rules ans settings on the two interfaces.

That's why i want to ask, how is the easiest way to change from an interface to an vlan?

Or is the only way

• move the LAN address (interface) to an other address in an unused network
• Create the VLAN
• Change every rules and setting manually to the new (vlan-)interface

Thanks a lot for your support.

[Patrick M. Hausen]

Create the VLAN on igb8. Move the assignment of "LAN" from igb8 to that VLAN. Change your switch. Probably best to reboot OPNsense. Done.

No need to change WAN/igb9 - Zenarmor is for internal networks, not your uplink.

[pleibling]

Thanks a lot for your fast help Patrick, this sounds very easy.

I will try it .

[pleibling]

Hi Patrick,

try this yesterday. Works perfect - and changed the configuration in a few minutes.

Thanks for your Help .