Much slower speed on DEC2750 vs Linux VM

[craig]

I've been getting much lower speeds when running speedtest on my DEC2750 vs a Linux VM (ultimately connected to the DEC2750).

Included speedtests from each below, was wondering if anyone else had experienced this, and what was the cause?

Linux VM

Code: [Select]

speedtest --server-id 62845

   Speedtest by Ookla

      Server: Netcalibre - London (id: 62845)
         ISP: Netcalibre
Idle Latency:    14.07 ms   (jitter: 0.11ms, low: 13.98ms, high: 14.26ms)
    Download:   764.81 Mbps (data used: 1.3 GB)
                 13.28 ms   (jitter: 0.56ms, low: 12.38ms, high: 20.27ms)
      Upload:   107.42 Mbps (data used: 53.8 MB)
                 13.97 ms   (jitter: 0.36ms, low: 12.78ms, high: 15.01ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/5bdd45ce-6b89-4767-bd4b-67d3bb8563ab

DEC2750

Code: [Select]

speedtest --server-id 62845

   Speedtest by Ookla

      Server: Netcalibre - London (id: 62845)
         ISP: Netcalibre
Idle Latency:    14.02 ms   (jitter: 0.14ms, low: 13.91ms, high: 14.17ms)
    Download:   295.77 Mbps (data used: 493.8 MB)
                 13.07 ms   (jitter: 1.86ms, low: 12.15ms, high: 232.27ms)
      Upload:   105.77 Mbps (data used: 101.0 MB)
                 13.52 ms   (jitter: 0.57ms, low: 12.11ms, high: 16.02ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/10093fda-0d10-43fb-841e-160a16f54056

[meyergru]

Guessing from your earlier posts, you have traffic shaping enabled. See this.

Also, if you did not enable RSS on OpnSense itself, it may well be that its original speeds are not as much optimized as the through traffic it just routes.