Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Randomly Crashes
« previous
next »
Print
Pages: [
1
]
Author
Topic: Randomly Crashes (Read 939 times)
0zzy
Full Member
Posts: 127
Karma: 3
Randomly Crashes
«
on:
October 20, 2023, 03:13:57 pm »
Since today I can't do anything in the WebGUI, also a pkg update run ends in crashing the system.
The only thing I changed yesterday was to configure the Telephony in the Firewall Settings.
I don't installed anything since Monday, also restored a backup from Sunday, but the Problem still exists.
I'm not really sure if the crash report was send, so where can I find it to add it here?
What I found out, it's enough to change a setting in Unbound or simply check for new updates in the webui.
«
Last Edit: October 20, 2023, 03:31:13 pm by 0zzy
»
Logged
Protectli FW4B
Intel J6412 4 cores
4x Intel I225-V 2,5 Gbit/s
16 GB memory
480 GB m.2 SATA SSD storage
Coreboot
amichel
Jr. Member
Posts: 87
Karma: 8
Re: Randomly Crashes
«
Reply #1 on:
October 20, 2023, 04:05:00 pm »
If it still crashes after applying a backup, it probably has other reasons. Could it be that there is a hardware issue (defective disk, RAM, CPU)?
Logged
CJ
Hero Member
Posts: 832
Karma: 30
Re: Randomly Crashes
«
Reply #2 on:
October 20, 2023, 04:45:08 pm »
Based on the limited info provided, it sounds like bad hardware. Start with memtest and see what that reports. I would also do a SMART test on your drive.
Anything beyond that is just a guess without more info.
«
Last Edit: October 22, 2023, 04:26:26 pm by CJ
»
Logged
Have Answer, Will Blog
0zzy
Full Member
Posts: 127
Karma: 3
Re: Randomly Crashes
«
Reply #3 on:
October 20, 2023, 06:16:43 pm »
I run memtest on my server, everything seems to be okay.
Also (because it's a Debian Based System as far as I know [Proxmox]) I run hw-probe, also there no reasons to see...
I reinstalled OPNSense on a new VM.
This installation is running fine (at the moment).
So there have to be any issue in the old installation.
Logged
Protectli FW4B
Intel J6412 4 cores
4x Intel I225-V 2,5 Gbit/s
16 GB memory
480 GB m.2 SATA SSD storage
Coreboot
0zzy
Full Member
Posts: 127
Karma: 3
Re: Randomly Crashes
«
Reply #4 on:
October 20, 2023, 07:01:33 pm »
seems I found the guilty service.
after I reinstall telegraf (used for influxdb and Grafana), I have the same problems.
After I click anything in the WebUI, the System is crashing.
So there is no faulty hardware on my side
Logged
Protectli FW4B
Intel J6412 4 cores
4x Intel I225-V 2,5 Gbit/s
16 GB memory
480 GB m.2 SATA SSD storage
Coreboot
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Randomly Crashes