Decisio Dec750

Started by karon, January 01, 2024, 09:57:24 PM

Previous topic - Next topic
Hi,

I'm looking into possibly switching to a Dec750.
Are there any users of this server on the forum who can give me quick performance feedback?

Another question.

On the dec750 documentation it is indicated that the 2 10Gb interfaces do not work at the same time as the 3 2.5Gb interfaces!!!
Do I understand correctly?
We can therefore only connect 2 interfaces in sfp+ or 3 interfaces in 2.5??

I do not believe that to be the case at all.

The SFP+ ports are driven by the AMD network driver (app) and the copper ports are driven by an Intel i210 chip.

No reason they can't be used concurrently.

You probably mis-read the documentation:

QuoteWhen using SFP+Modules, do not mix 2.5/5Gbps and 10Gbps link-speed as the hardware does not support mixing these due to different frequencies.

It means you cannot switch one SFP+ connection independently to 2.5 or 5 GBit/s if you want the other one on 10 GBit/s. That has nothing to do with the 2.5 GBit/s NICs.
Intel N100, 4* I226-V, 2* 82559, 16 GByte, 500 GByte NVME, ZTE F6005

1100 down / 800 up, Bufferbloat A+

Thanks meyergru and dmurphy for your reply.

Always interest by quick performance feedback.

Regards

The performance figures are shown underneath the image here: https://shop.opnsense.com/product/dec750-opnsense-desktop-security-appliance/

The device can route up to to 10 Gbps and ~1.2 Gbps VPN traffic.
Intel N100, 4* I226-V, 2* 82559, 16 GByte, 500 GByte NVME, ZTE F6005

1100 down / 800 up, Bufferbloat A+