Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
No route to host
« previous
next »
Print
Pages: [
1
]
Author
Topic: No route to host (Read 1710 times)
netshi
Newbie
Posts: 14
Karma: 0
No route to host
«
on:
August 23, 2023, 03:39:20 pm »
I am having issues updating one of my OPNsense firewalls. The firewall is currently at 23.1.11. What is happening is whenever the traffic is going to the Internet, somehow the firewall is forwarding the traffic out of my WireGuard remote access (wgra) interface. It should be the out of the WAN interface. This is also true when I ran a ping.
I found a 0.0.0.0/1 via wgra under the System/Routes/Status and deleted it. However, nothing has changed.
My route table doesn't show a default route via WireGuard interface. The only default route is on the WAN interface from my ISP.
Why OPNsense is forcing itself to take the WireGuard remote access path?
Logged
netshi
Newbie
Posts: 14
Karma: 0
Re: No route to host
«
Reply #1 on:
August 24, 2023, 06:45:43 pm »
Weird thing. After removing the 0.0.0.0/1 via wgra, I lost connectivity to the web UI. The local user could not reach the web UI as well. I could WireGuard in but cannot access the web UI like I used to. The site-to-site VPN (WG and IPSec) are up, but cannot reach the web UI. Today, I was able to access the web UI again on both remote access and site-to-site.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
No route to host