Update from 22.7.11 to 23.1 failed

[pberger]

I run the update from 22.7.11 to 23.1 on a Deciso DEC2640.

After boot Web GUI didn't come up & firewall was not responding to pings either.

I rebooted with serial console attached and got this output. When pressing ENTER I'm at the shell (not the OpnSense console). From the version in the boot screen it does not seem like the update to 23.1 happened yet, but firewall is also no longer reachable.

Code: [Select]

root@:/ # reboot
2023-04-22T12:31:24.321600+02:00 - init 1 - - single user shell terminated.
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 0 0 done
All buffers synced.
Uptime: 1h48m9s
uhub3: detached
uhub0: detached
uhub4: detached
uhub2: detached
uhub1: detached
I2C: 01:50 missing read_resources
I2C: 01:51 missing read_resources
PNP: 002e.0 missing read_resources
skipping PNP: 002e.0@60 fixed resource, size=0!
skipping PNP: 002e.0@70 fixed resource, size=0!
PNP: 002e.0 missing set_resources
ERROR: PCI: 00:18.0 10b8 ??? ???64 size: 0x0000000000 not assigned
ASSERTION ERROR: file 'src/northbridge/amd/pi/agesawrapper.c', line 309
SeaBIOS (version rel-1.10.2)
BUILD: gcc: (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 binutils: (GNU Binutils for Ubuntu) 2.26.1
SeaBIOS (version rel-1.10.2)
BUILD: gcc: (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 binutils: (GNU Binutils for Ubuntu) 2.26.1
Found coreboot cbmem console @ cffde000
Found mainboard Deciso Netboard A10 FT3b
Relocating init from 0x000e36e0 to 0xcff51dc0 (size 49568)
Found CBFS header at 0xff800138
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/*@14,7
2: /pci@i0cf8/*@11/drive@0/disk@0
3: /pci@i0cf8/*@11/drive@1/disk@0
4: /pci@i0cf8/usb@12,2/usb-*@2
5: /pci@i0cf8/usb@13,2/usb-*@1
6: /pci@i0cf8/usb@12,2/usb-*@1
7: HALT
Found 25 PCI devices (max PCI bus is 04)
Copying SMBIOS entry point from 0xcff9e000 to 0x000f6f00
Copying ACPI RSDP from 0xcffaf000 to 0x000f6ed0
Copying MPTABLE from 0xcffd3000/cffd3010 to 0x000f6cf0
Copying PIR from 0xcffd4000 to 0x000f6cc0
Using pmtimer, ioport 0x818
Scan for VGA option rom
XHCI init on dev 00:10.0: regs @ 0xf7f04000, 4 ports, 32 slots, 32 byte contexts
XHCI    extcap 0x1 @ 0xf7f04500
XHCI    protocol USB  3.00, 2 ports (offset 1), def 0
XHCI    protocol USB  2.00, 2 ports (offset 3), def 10
XHCI    extcap 0xa @ 0xf7f04540
EHCI init on dev 00:12.0 (regs=0xf7f07020)
EHCI init on dev 00:13.0 (regs=0xf7f08020)
AHCI controller at 00:11.0, iobase 0xf7f06000, irq 0
Searching bootorder for: /pci@i0cf8/*@14,7
Found 0 lpt ports
Found 1 serial ports
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/nvramcui
Searching bootorder for: /rom@img/coreinfo
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
AHCI/0: Set transfer mode to UDMA-6
Got ps2 nak (status=51)
AHCI/0: registering: "AHCI/0: TS256GMSA452T2 ATA-9 Hard-Disk (238 GiBytes)"
XHCI no devices found
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at c000:0003
Running option rom at c100:0003
Running option rom at c200:0003
Running option rom at c300:0003
Searching bootorder for: /pci@i0cf8/pci-bridge@2,2/*@0
Searching bootorder for: /pci@i0cf8/pci-bridge@2,3/*@0
Searching bootorder for: /pci@i0cf8/pci-bridge@2,4/*@0
Searching bootorder for: /pci@i0cf8/pci-bridge@2,5/*@0

Press ESC for boot menu.

Searching bootorder for: HALT
drive 0x000f6c50: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=500118192
Space available for UMB: c4000-ee000, f6720-f6c50
Returned 258048 bytes of ZoneHigh
e820 map has 7 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000cff9d000 = 1 RAM
  4: 00000000cff9d000 - 00000000d0000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
  6: 0000000100000000 - 000000022f000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00
/boot/config: -S115200 -h
Consoles: serial port
BIOS drive C: is disk0
BIOS 639kB/3406452kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
|
-
|
             ______  _____  _____
            /  __  |/ ___ |/ __  |
            | |  | | |__/ | |  | |___  ___ _ __  ___  ___
            | |  | |  ___/| |  | / __|/ _ \ '_ \/ __|/ _ \
            | |__| | |    | |  | \__ \  __/ | | \__ \  __/
            |_____/|_|    |_| /__|___/\___|_| |_|___/\___|

 +-----------------------------------------+     @@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |  1. Boot Multi user [Enter]             |   @@@@@                    @@@@@
 |  2. Boot Single user                    |       @@@@@            @@@@@
 |  3. Escape to loader prompt             |    @@@@@@@@@@@       @@@@@@@@@@@
 |  4. Reboot                              |         \\\\\         /////
 |  5. Cons: Serial                        |   ))))))))))))       (((((((((((
 |                                         |         /////         \\\\\
 |  Options:                               |    @@@@@@@@@@@       @@@@@@@@@@@
 |  6. Kernel: default/kernel (1 of 2)     |       @@@@@            @@@@@
 |  7. Boot Options                        |   @@@@@                    @@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@
 +-----------------------------------------+
   Autoboot in 0 seconds. [Space] to pause        22.7 ``Powerful Panther''  /

Loading kernel...
/boot/kernel/kernel text=0x18a810 text=0xea7240 text=0x6921dc data=0x140 data=0x1ccc08+0x4323f8 syms=[0x8+0x19f638+0x8+0x1be5be]
Loading configured modules...
/etc/hostid size=0x25
/boot/kernel/pfsync.ko size 0xe318 at 0x235e000
loading required module 'pf'
/boot/kernel/pf.ko size 0x75240 at 0x236d000
/boot/kernel/if_lagg.ko size 0x18338 at 0x23e3000
loading required module 'if_infiniband'
/boot/kernel/if_infiniband.ko size 0x3538 at 0x23fc000
/boot/kernel/carp.ko size 0xf460 at 0x2400000
/boot/entropy size=0x1000
/boot/kernel/if_enc.ko size 0x4b58 at 0x2411000
/boot/kernel/if_gre.ko size 0xba48 at 0x2416000
/boot/kernel/pflog.ko size 0x3b18 at 0x2422000
/boot/kernel/if_bridge.ko size 0xe4d0 at 0x2426000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x7870 at 0x2435000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU: AMD GX-420MC SOC                                (1996.35-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 9378463744 (8944 MB)
avail memory = 8263880704 (7881 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic1: MADT APIC ID 5 != hw id 0
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 2 3 1
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf6f00-0xf6f1e
smbios0: Version: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <CORE COREBOOT>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) I210 Flashless (Copper)> port 0x2000-0x201f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 28 at device 0.0 on pci1
igb0: NVM V0.6 imgtype6
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: f4:90:ea:00:3e:16
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pcib2: failed to allocate initial I/O port window: 0x2000-0x2fff
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) I210 Flashless (Copper)> port 0x3000-0x301f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 32 at device 0.0 on pci2
igb1: NVM V0.6 imgtype6
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: f4:90:ea:00:3e:17
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pcib3: failed to allocate initial I/O port window: 0x3000-0x3fff
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I210 Flashless (Copper)> port 0x4000-0x401f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 36 at device 0.0 on pci3
igb2: NVM V0.6 imgtype6
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
igb2: Ethernet address: f4:90:ea:00:3e:18
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> irq 24 at device 2.5 on pci0
pcib4: failed to allocate initial I/O port window: 0x4000-0x4fff
pci4: <ACPI PCI bus> on pcib4
igb3: <Intel(R) I210 Flashless (Copper)> port 0x6000-0x601f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 40 at device 0.0 on pci4
igb3: NVM V0.6 imgtype6
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
igb3: Ethernet address: f4:90:ea:00:3e:19
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xf7f04000-0xf7f05fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x5010-0x5017,0x5020-0x5023,0x5018-0x501f,0x5024-0x5027,0x5000-0x500f mem 0xf7f06000-0xf7f063ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf7f07000-0xf7f070ff irq 18 at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xf7f08000-0xf7f080ff irq 18 at device 19.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
hdac0: <AMD Hudson-2 HDA Controller> mem 0xf7f00000-0xf7f03fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xf7f09000-0xf7f090ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
orm0: <ISA Option ROM> at iomem 0xee000-0xeffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC" frequency 1996255577 Hz quality 1000
Timecounters tick every 1.000 msec
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TS256GMSA452T2 02J0T4GB> ACS-2 ATA SATA 3.x device
ada0: Serial Number G339770182
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
ugen1.1: <AMD EHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen2.1: <AMD EHCI root HUB> at usbus2
uhub0 on usbus1
uhub1 on usbus2
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2 on usbus0
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Mounting filesystems...
tunefs: soft updates remains unchanged as enabled
tunefs: file system reloaded
tunefs: issue TRIM to the disk remains unchanged as enabled
tunefs: file system reloaded
** /dev/gpt/rootfs
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 56671417 free (11777 frags, 7082455 blocks, 0.0% fragmentation)
uhub2: 4 ports with 4 removable, self powered
Setting hostuuid: 766280cb-5ebe-11e7-bc72-f490ea003e16.
Setting hostid: 0x2d7e953a.
Configuring vt: blanktime.
Configuring crash dump device: /dev/label/swap0
swapon: adding /dev/label/swap0 as swap device
.ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.2.1 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.32/mach/CORE
32-bit compatibility ldconfig path:
done.
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
>>> Invoking early script 'upgrade'
>>> Invoking early script 'configd'
Starting configd.
ugen2.2: <vendor 0x0438 product 0x7900> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus2
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub3: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
>>> Invoking early script 'templates'
Generating configuration: OK
>>> Invoking early script 'backup'
>>> Invoking backup script 'captiveportal'
>>> Invoking backup script 'dhcpleases'
>>> Invoking backup script 'duid'
>>> Invoking backup script 'netflow'
>>> Invoking backup script 'rrd'
>>> Invoking early script 'carp'
CARP event system: OK
Launching the init system...done.
Initializing...........done.
Starting device manager...igb0: link state changed to UP
igb1: link state changed to UP
igb2: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
done.
Configuring login behaviour...
Fatal error: Uncaught Error: Call to undefined function gettext() in /usr/local/etc/inc/system.inc:1042
Stack trace:
#0 /usr/local/etc/inc/system.inc(1085): system_console_types()
#1 /usr/local/etc/rc.bootup(67): system_login_configure(true)
#2 {main}
  thrown in /usr/local/etc/inc/system.inc on line 1042
When opening OpnSense shell with "/usr/local/sbin/opnsense-shell" and selecting "11) Reload all services" I get the following output:

Code: [Select]

Enter an option: 11

Writing firmware setting...done.
Writing trust files...done.
Configuring login behaviour...
Fatal error: Uncaught Error: Call to undefined function gettext() in /usr/local/etc/inc/system.inc:1042
Stack trace:
#0 /usr/local/etc/inc/system.inc(1085): system_console_types()
#1 /usr/local/etc/rc.reload_all(47): system_login_configure(true)
#2 {main}
  thrown in /usr/local/etc/inc/system.inc on line 1042

Any idea how to solve this?

Thanks
Pascal

[pberger]

I solved it by reinstalling OpnSense