Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
High availability
»
HA carp failover switch need 5 min to connect internet Hetzner vswitch
« previous
next »
Print
Pages: [
1
]
Author
Topic: HA carp failover switch need 5 min to connect internet Hetzner vswitch (Read 1673 times)
mcsego
Newbie
Posts: 2
Karma: 0
HA carp failover switch need 5 min to connect internet Hetzner vswitch
«
on:
March 30, 2023, 01:46:41 am »
I have 2 servers from Hetzner and I'm using Proxmox on both of them. Each server has 2 instances of OPNsense as virtual machines. I have assigned a public IP subnet /29 in vSwitch for both servers.
Here is my setup:
For each OPNsense instance, I have assigned an IP address from the vSwitch subnet as the WAN interface, which I can directly access from the IP (I think this works fine).
I have tested 2 different setups with the same result:
1. I have created a second WAN interface with the IP address that will be used for failover and the LAN CARP address (for both OPNsense instances).
2. I have entered the LAN and WAN CARP addresses.
The problem is that when I test by shutting down the master OPNsense and the failover to backup works, it takes 4-7 minutes for the internet connection to suddenly come up and be pinged. What could be causing this delay? Or is this normal? The same delay occurs when I turn on the master again, taking 4-7 minutes to switch back.
I would be grateful for any help.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
High availability
»
HA carp failover switch need 5 min to connect internet Hetzner vswitch