Configd socket missing

[eponymous]

Just updated to 22.1.4 and see this on boot up:

Generating configuration: configd socket missing (@/var/run/configd.socket)
>> Error in early script ‘templates’

Otherwise everything seems to be working fine.

Anything to worry about?

[franco]

It shouldn't happen, but if the system booted up ok the socket came up shortly after. If it wasn't available at all the system wouldn't end up in a functional boot.


Cheers,
Franco

[eponymous]

That was my thoughts as well but goof to get confirmation - thanks!

[Altmana]

I have the same issue. It started after updating from 22.1.5 to 22.1.6

>>> Invoking early script 'templates'
Generating configuration: configd socket missing (@/var/run/configd.socket)
>>> Error in early script 'templates'

The system boots just fine and everything seems to work as it used to.

Correction the network seems to be crashing when the device is untouched:

login: 615.010326 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
615.583381 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
igb1: link state changed to DOWN
615.879131 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
616.176454 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
616.199640 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
igb0: link state changed to DOWN
616.483398 [ 849] iflib_netmap_config       txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048
igb0: link state changed to UP
igb1: link state changed to UP

[Altmana]

Looking earlier in the log I can also see:

pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0xd0000000-0xd001ffff,0xd0020000-0xd0023fff irq 28 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 00:0d:b9:5c:43:fc
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pcib2: failed to allocate initial I/O port window: 0x2000-0x2fff
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0xd0100000-0xd011ffff,0xd0120000-0xd0123fff irq 32 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 00:0d:b9:5c:43:fd
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pcib3: failed to allocate initial I/O port window: 0x3000-0x3fff
pci3: <ACPI PCI bus> on pcib3