Wireguard is not working after the last patch (OPNsense 22.1.2_1-amd64)

[fellpower]

hey

i have to shorten my story

- using the sense for month now, but with issues
- im using proxmox - and the sense is working in a VM
- all is fine, working good - no config errors (as i need - i can work with that issues)

- i have many vms (windows and debian linux)

- but, from the start, as im using opnsense, i have to use the option 11 in the console, because, when im starting opnsense, NONE of my linux machines have access to the internet.
- if im using option 11 to reload all services, all linux systems have internet - so this was my fix for that (we tried to find the error here in the forum, but it did not work)

https://forum.opnsense.org/index.php?topic=25571

its german, i hope u can read it anyway. ;)

- after the last update (OPNsense 22.1.2_1-amd64) my "WG working before the patch", is not working anymore

- if im starting opnsense and using option 11, to get all my vms in the internet, wg works
- BUT if im logout from the console, it states that wg0 is changed to down

that must be a bug, or something, because, if im stay logged in, wg works


any ideas?

Chris

[MCMLIX]

Hello:
I have OPNsense 22.1.1_3 on Proxmox 7-1.10 with 3 Intel nics passed through, I have Surfshark VPN and 4 vlans. I setup with this guide (https://schnerring.net/blog/opnsense-baseline-guide-with-vpn-guest-and-vlan-support/).

In the past I had a problem with VMs and vlan connections, but it was my Proxmox setup that was the problem.
Everything is running rock solid as of this writing. ( touch wood. )
Went everything is running good I don't update for a week or so. I let small bugs work their way out. If it's not broke don't fix it syndrome.

Again, try to look at your Proxmox network setup. I know I'm not really giving you a solution, but I know its possible.
Try rolling back to 22.1.1_3.

Brian

[fellpower]

Hey Brain

Thx for your reply.

I have no VLANS or something, my setup looks as u can see in the attached picture.

and all other VMs are okay (windows) - only the Linux VMs are not working. they get ips, they can communicate in tha LAN segment, but the traffic from them is broken somewhere in opnsense - because the traffic is not seen in opnsense.

if i reload the services, it works - but only, if i dont logout....

[fellpower]

After the last patch, the issue is there...

anyone have an idea?

[slackadelic]

I'm on the latest patch and wireguard appears to be working for me.  However, I'm not using any site to site wireguard VPN tunnels, this is just 'roadwarrior' type stuff.

[meepmeep]

**  solved for my specific case, site-to-site endpoints should not have endpoint port and adress **