Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
High availability
»
Is this HA config possible ?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Is this HA config possible ? (Read 1861 times)
Eloïse
Newbie
Posts: 1
Karma: 0
Is this HA config possible ?
«
on:
January 23, 2023, 09:52:05 pm »
Hello, I'm quite new to opnsense, I've installed opnsense as a front router in a proxmox VM just behind a fiber ONT.
It works perfectly but now I want to consolidate this setup by adding another opnsense in HA cluster and adding an LTE box as a failover if fiber ISP is failing.
Can I make this :
________
Opnsense1 wan1-----ı switch ı
ı ı------ONT
Opnsense2 wan1-----ı ı
––––––––
-----------
Opnsense1 wan2-----ı switch ı
ı ı------LTE box
Opnsense2 wan2-----ı ı
––––––––
Thanks for your help.
Logged
WaffleIron
Newbie
Posts: 17
Karma: 3
Re: Is this HA config possible ?
«
Reply #1 on:
January 29, 2023, 06:49:10 pm »
Hi Eloïse,
I think you are really asking two questions here.
1. How do you make the LTE circuit a failover circuit.
2. How can you apply this failover logic to a set of opnsense boxes running in HA.
For question 1, I think what you are looking for is a gateway group. You essentially create a group that contains your different gateways (ONT and LTE) and give each gateway a priority so one is preferred over another until it fails or has performance issues like packet loss and latency.
https://docs.opnsense.org/manual/multiwan.html
For question 2, in order for multiple boxes to share a WAN connection the circuits must be larger than a /30 (255.255.255.252) since you need to use 3x IP address (1x for service provider, 1x for opnsense1, 1x for opnsense2). Assuming this is not a problem, you would simply create the same gateway group on each box where ONT is preferred until it fails which activates LTE. Would look something like the attached.
Logged
rodgers-95
Newbie
Posts: 2
Karma: 0
Re: Is this HA config possible ?
«
Reply #2 on:
February 07, 2023, 07:32:32 pm »
Hello,
I have almost the same configuration (with ADSL and PPPoE connection instead of LTE) and it is possible. However, I currently have a little problem with the use of ONT because I don't have a router upstream (
https://forum.opnsense.org/index.php?topic=32377.0
)
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
High availability
»
Is this HA config possible ?