Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
21.1 Legacy Series
»
Logging targets stopped after 21.1.3 upgrade
« previous
next »
Print
Pages: [
1
]
Author
Topic: Logging targets stopped after 21.1.3 upgrade (Read 2099 times)
gauthig
Newbie
Posts: 27
Karma: 6
Logging targets stopped after 21.1.3 upgrade
«
on:
March 10, 2021, 04:52:26 pm »
After the upgrade and reboot I notice my ELK server did not get any new records. I stopped and started the syslog-ng service and still nothing. Did tcpdump on the target server and do not see anything for the port I am sending udp log packets on. Then did tcpdump on the opnsense server (tcpdump -Q out udp port 5140) No traffic is going to the ELK server.
I also have Sensi installed with remote ELK (same elk cluster) and it is still fine (TCP port 9200).
Any logs or setting that may help troubleshooting?
Logged
sorano
Full Member
Posts: 153
Karma: 21
Re: Logging targets stopped after 21.1.3 upgrade
«
Reply #1 on:
March 10, 2021, 05:04:02 pm »
There were updates to syslog-ng so you should take a look at System: Settings: Logging / targets and verify that everything is configured correctly.
Logged
2x 23.7 VMs & CARP, 4x 2.1GHz, 8GB
Cisco L3 switch, ESXi, VDS, vmxnet3
DoT, Chrony, HAProxy + NAXSI, Suricata
VPN: IPSec, OpenVPN, Wireguard
MultiWAN: Fiber 500/500Mbit dual stack + 4G failover
--
Available for private support.
Did my answer help you? Feel free to click [applaud] to the left
franco
Administrator
Hero Member
Posts: 17660
Karma: 1611
Re: Logging targets stopped after 21.1.3 upgrade
«
Reply #2 on:
March 10, 2021, 07:53:12 pm »
From x to 21.1.3. What was x?
Cheers,
Franco
Logged
gauthig
Newbie
Posts: 27
Karma: 6
Re: Logging targets stopped after 21.1.3 upgrade
«
Reply #3 on:
March 10, 2021, 08:33:34 pm »
@Franco, from 21.1.1 to 21.1.3.
Resolved - deleted the existing target and created a new one.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
21.1 Legacy Series
»
Logging targets stopped after 21.1.3 upgrade
