Cavium Nitrox card drivers

« previous next »

Print

Pages: [1]

Author Topic: Cavium Nitrox card drivers (Read 3349 times)

Moofo

Newbie
Posts: 11
Karma: 0

Cavium Nitrox card drivers

« on: September 09, 2020, 03:36:11 pm »

I run OpnSense in an XTM5 second gen. It works beautifully.

This hardware comes with a Nitrox CAvium Card to accelerate VPN crypto

It appears drivers were released for linux:

https://github.com/torvalds/linux/tree/master/drivers/crypto/cavium/nitrox

Does it means someone could support that card in OpnSense ?

Logged

banym

Sr. Member
Posts: 468
Karma: 31
Free Human Being, FreeBSD, Linux and Mac nerd

Re: Cavium Nitrox card drivers

« Reply #1 on: September 09, 2020, 06:06:43 pm »

Someone indeed could to that. Because it is software and someone could port that driver over to FreeBSD or check if there is one already.

The NITROX III Series seem to come with a FreeBSD driver. But they talk about 1024bit or 2048bit. Not what I would use.

What would be the benefit for someone to do this work?

Logged

Twitter: banym
Mastodon: banym@bsd.network
Blog: https://www.banym.de

Moofo

Newbie
Posts: 11
Karma: 0

Re: Cavium Nitrox card drivers

« Reply #2 on: September 09, 2020, 08:14:10 pm »

Less Tax on CPU for vpn encryption, decryption.

Logged

banym

Sr. Member
Posts: 468
Karma: 31
Free Human Being, FreeBSD, Linux and Mac nerd

Re: Cavium Nitrox card drivers

« Reply #3 on: September 09, 2020, 08:22:34 pm »

What bandwidth do you push over the VNP?

With AES-NI in my understanding you get similar things free for "normal" bandwidth usage.

Logged

Twitter: banym
Mastodon: banym@bsd.network
Blog: https://www.banym.de

Print

Pages: [1]

« previous next »