Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
New hardware?
« previous
next »
Print
Pages: [
1
]
Author
Topic: New hardware? (Read 2241 times)
loganx1121
Full Member
Posts: 123
Karma: 0
New hardware?
«
on:
August 24, 2020, 06:45:20 pm »
I'm currently using a QOTOM box which is mostly ok. It NATS and routes at gig speeds which I get from the ISP, but it only has 6 NICS. I'm looking for some recommendations on an appliance type box that would give me 8-12 NICs. Not sure if it's better to buy something or just build a server with NIC cards but I'd like to keep the 1U formfactor or even 2U if possible. I was looking at some stuff on this site
https://www.firewallhardware.it/en/
Mainly the following -
https://www.miniserver.it/firewall/power-utm/firewall-appliance-power-utm-aluminum.html
but it seems a bit pricey for what it is considering it's DDR3, does't seem to have ECC, etc.
Just wondering what people's recommendations are for a box with 8-12 NICs in a 1U or 2U form factor.
Thanks in advance
Logged
marjohn56
Hero Member
Posts: 1701
Karma: 179
Re: New hardware?
«
Reply #1 on:
August 25, 2020, 08:45:10 am »
You'll be moving into the 'pro' sector with that number of ports, and that's going to get expensive. It's far cheaper to just get a switch. There are a lot of good cheap low power switches, both managed and un-managed available.
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
loganx1121
Full Member
Posts: 123
Karma: 0
Re: New hardware?
«
Reply #2 on:
August 25, 2020, 02:04:30 pm »
I already have 2 layer 3 cisco switches I'm using, a 24 port and 48 port, core and access switches respectively. Someone on reddit suggested just doing a LAGG on OPNsense between the switches, which I might do, but I still think a bit beefier firewall would be better. I'm considering purchasing the following -
https://www.aliexpress.com/item/32975669960.html?spm=a2g0o.productlist.0.0.fc7435a0eku0jb&algo_pvid=6e80f769-775f-4722-8cb1-de5b8c236d90&algo_expid=6e80f769-775f-4722-8cb1-de5b8c236d90-0&btsid=0ab6f81e15983144670171621e299a&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The 16GB RAM, 64GB SSD and i7-4770 CPU version. CPU benchmarks shows the i7 4770 to be considerably beefier than the i7 7500U currently in my existing QOTOM box.
Logged
marjohn56
Hero Member
Posts: 1701
Karma: 179
Re: New hardware?
«
Reply #3 on:
August 25, 2020, 03:31:16 pm »
Very pretty... shame about the fans, but if you don't mind them it looks OK. Not sure about your spec comparison, 15% is not that much, but should do the job just fine.
https://cpu.userbenchmark.com/Compare/Intel-Core-i7-7500U-vs-Intel-Core-i7-4770/m171274vs1978
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
loganx1121
Full Member
Posts: 123
Karma: 0
Re: New hardware?
«
Reply #4 on:
August 25, 2020, 05:50:48 pm »
Shame about the fans because of noise or as a possible point of failure? The noise won't bother me as the firewall will be located in an alternate room with the rest of my network gear and cisco switches.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
New hardware?