Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
19.1 Legacy Series
»
19.1 Installer Segmentation Fault
« previous
next »
Print
Pages: [
1
]
Author
Topic: 19.1 Installer Segmentation Fault (Read 4560 times)
pmsopnsense
Newbie
Posts: 3
Karma: 0
19.1 Installer Segmentation Fault
«
on:
February 11, 2019, 08:26:30 pm »
Hi all
First time using OPNsense, it suffer core dump at Installer. However, terminal still allow to login root and configures and Ping etc, but once reboot all setting gone.
Help please, HP240 Intel Celeron N3060, 1Gbit LAN and D-Link DUB1312 USB Ethernet
Thanks in advance
Logged
pmsopnsense
Newbie
Posts: 3
Karma: 0
Re: 19.1 Installer Segmentation Fault
«
Reply #1 on:
February 11, 2019, 09:41:50 pm »
FYI, Just installed ipfire on same hardwares, and ipfire works properly.
USB Ethernet D-Link SUB1312 works properly
Regards
Logged
weust
Hero Member
Posts: 650
Karma: 57
Re: 19.1 Installer Segmentation Fault
«
Reply #2 on:
February 11, 2019, 10:57:37 pm »
The losing settings after a reboot is because it ran the LiveCD (in case you were wondering).
Logged
Hobbyist at home, sysadmin at work. Sometimes the first is mixed with the second.
Steven
Newbie
Posts: 46
Karma: 4
Re: 19.1 Installer Segmentation Fault
«
Reply #3 on:
February 11, 2019, 11:07:04 pm »
I had a similar issue happen. Turns out I needed to re-image my install media. Once I re-flashed the USB drive with OPNsense installer and ran again it worked. See if that solves issue, if not maybe another issue that may need workaround.
Logged
pmsopnsense
Newbie
Posts: 3
Karma: 0
Re: 19.1 Installer Segmentation Fault
«
Reply #4 on:
February 12, 2019, 12:26:01 am »
Hi Steven and weust,
I re-images 4 times, 2 times for every mirror. ok try again in other days
Thank you for reply
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
19.1 Legacy Series
»
19.1 Installer Segmentation Fault
