Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - sam1970

#1
Thanks for your advice. You're right about the Amazon listing. It's surprisingly difficult to find a reliable, reasonably priced mini PC for OPNsense on Amazon.

I've also been looking at Protectli and found these two models:

- VP3230: Intel N305, 8 cores, 2× Intel i226-V, DDR5 — €482.79 incl. VAT.
- VP2430e: Intel N150, 4 cores, 4× Intel i226-V, DDR5 — €458.59 incl. VAT.

Both are fanless and support NVMe storage.

I'm leaning towards the VP3230. For just €24.20 more, it offers twice the CPU cores and more headroom for experimenting with Suricata and other features.

Since I already use managed switches, I assume two Ethernet ports (WAN and LAN with VLANs) should be sufficient.

You recommended a four-port i226-V system, but I haven't been able to find a suitable four-port N305 model that's readily available to buy.

Is there a particular advantage to having four physical ports in my setup when everything is connected through managed switches?

Which of these two Protectli models would you choose, or would you recommend something else in this price range?

Thanks again!

#2
Advice needed: Mini PC for my first OPNsense firewall

Hi everyone,

I'm new to OPNsense and would like to set up a dedicated mini PC as a firewall for my home network and homelab, running OPNsense directly on the hardware without Proxmox.

My current setup consists of an ISP modem/router, two managed Netgear switches (GS108E and GS308Ev4), a QNAP TS-664 running Docker containers (Pi-hole, Unbound, WireGuard), and a Raspberry Pi 5 running a second Pi-hole. I also use Proton VPN for selected traffic.

I'd like to gradually move routing, NAT, DHCP, VLANs and VPN management to OPNsense. I'm also interested in experimenting with Suricata IDS/IPS, Zenarmor and network monitoring. Gigabit speeds are sufficient for my needs, and since I already have managed switches, two physical network ports are enough.

Hardware

After browsing this forum, I came across the **HUNSN RJ35 with Intel Core i3-N305 (DDR4 version)**:

Amazon

I'd prefer a slightly more powerful CPU than strictly necessary to leave some headroom for future use.

I already have the following components available:

- 8 GB Transcend DDR4-2666 SO-DIMM (TS1GSH64V6B).
- 2× WD Red SN700, 250 GB NVMe M.2 2280.

According to the specifications, the HUNSN supports DDR4-3200. I'd like to start with my existing DDR4-2666 module and possibly upgrade to 16 GB DDR4-3200 later, when RAM prices become more reasonable. One NVMe drive is sufficient for my needs.

My questions

1. Does anyone have experience with this HUNSN N305? How reliable is it for 24/7 operation, particularly regarding cooling, power consumption, BIOS support and potential Intel i226-V issues?
2. Will my DDR4-2666 module work in this DDR4-3200 system, and is 8 GB enough to get started with Suricata?
3. Based on your own experience, are there any better mini PCs you would recommend?
4. Which OPNsense plugins or features would you recommend for a homelab? I'm considering Suricata, Zenarmor, ntopng, WireGuard and policy-based routing through Proton VPN.
5. Would you recommend keeping my existing Pi-hole installations, or would Unbound with DNS filtering in OPNsense be a good alternative? I'm also considering NetAlertX as a replacement for Fing for network device discovery.

My main priorities are reliable 24/7 operation, good firmware support and reasonable power consumption. I'm specifically looking for a compact mini PC, not a rackmount server.

Thanks in advance for your advice and experiences!