Messages

[explicit]

26.7.6 also seems to have fixed it for me.
I also had to specify dev.ice.x.requested_fec explicit as RS-FEC, as it did not auto-negotiate successfull after DDP load without it set.

[1] ice0: <Intel(R) Ethernet Controller E810-XXV for SFP - 1.43.3-k> mem 0xc2000000-0xc3ffffff,0xc4010000-0xc401ffff at device 0.0 numa-domain 0 on pci6
[1] ice0: Loading the iflib ice driver
[1] ice0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.41.0, track id 0xc0000001.
[1] ice0: fw 7.6.2 api 1.7 nvm 4.60 etid 8001e8d4 netlist 4.3.4000-4.f.0.493a8aab oem 1.3682.0
[1] ice0: Using 4 Tx and Rx queues
[1] ice0: Reserving 4 MSI-X interrupts for iRDMA
[1] ice0: Using MSI-X interrupts with 9 vectors
[1] ice0: Using 1024 TX descriptors and 1024 RX descriptors
[1] ice0: ice_add_rss_cfg on VSI 0 could not configure every requested hash type
[1] ice0: PCI Express Bus: Speed 16.0GT/s Width x8
[1] ice0: pci_iov_attach failed (error=ENOENT)
[1] ice0: link state changed to UP
[1] ice0: Link is up, 25 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[1] ice0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] ice0: link state changed to DOWN
[4] ice0: All configured link modes were attempted but failed to establish link.
[4] ice0: The device will restart the process to establish link.
[4] ice0: Possible Solution: Check link partner connection and configuration.
[25] ice0: Link is up, 25 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[25] ice0: link state changed to UP

[1] ice2: <Intel(R) Ethernet Connection E823-C for SFP - 1.43.3-k> mem 0xd0000000-0xd7ffffff,0xda010000-0xda01ffff at device 0.0 numa-domain 0 on pci8
[1] ice2: Loading the iflib ice driver
[1] ice2: The DDP package was successfully loaded: ICE OS Default Package version 1.3.41.0, track id 0xc0000001.
[1] ice2: fw 7.1.6 api 1.7 nvm 3.26 etid 8001bc8c netlist 0.0.2768-1.14.1.59461500 oem 1.3429.0
[1] ice2: Using 4 Tx and Rx queues
[1] ice2: Reserving 4 MSI-X interrupts for iRDMA
[1] ice2: Using MSI-X interrupts with 9 vectors
[1] ice2: Using 1024 TX descriptors and 1024 RX descriptors
[1] ice2: ice_add_rss_cfg on VSI 0 could not configure every requested hash type
[1] ice2: link state changed to UP
[1] ice2: Link is up, 25 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[1] ice2: netmap queues/slots: TX 4/1024, RX 4/1024
[5] ice2: All configured link modes were attempted but failed to establish link.
[5] ice2: The device will restart the process to establish link.
[5] ice2: Possible Solution: Check link partner connection and configuration.
[5] ice2: link state changed to DOWN
[25] ice2: Link is up, 25 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[25] ice2: link state changed to UP

[explicit]

26.7.6 also seems to have fixed it for me.
I also had to specify dev.ice.x.requested_fec explicit as RS-FEC, as it did not auto-negotiate successfull after DDP load without it set.

[1] ice0: <Intel(R) Ethernet Controller E810-XXV for SFP - 1.43.3-k> mem 0xc2000000-0xc3ffffff,0xc4010000-0xc401ffff at device 0.0 numa-domain 0 on pci6
[1] ice0: Loading the iflib ice driver
[1] ice0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.41.0, track id 0xc0000001.
[1] ice0: fw 7.6.2 api 1.7 nvm 4.60 etid 8001e8d4 netlist 4.3.4000-4.f.0.493a8aab oem 1.3682.0
[1] ice0: Using 4 Tx and Rx queues
[1] ice0: Reserving 4 MSI-X interrupts for iRDMA
[1] ice0: Using MSI-X interrupts with 9 vectors
[1] ice0: Using 1024 TX descriptors and 1024 RX descriptors
[1] ice0: ice_add_rss_cfg on VSI 0 could not configure every requested hash type
[1] ice0: PCI Express Bus: Speed 16.0GT/s Width x8
[1] ice0: pci_iov_attach failed (error=ENOENT)
[1] ice0: link state changed to UP
[1] ice0: Link is up, 25 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[1] ice0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] ice0: link state changed to DOWN
[4] ice0: All configured link modes were attempted but failed to establish link.
[4] ice0: The device will restart the process to establish link.
[4] ice0: Possible Solution: Check link partner connection and configuration.
[25] ice0: Link is up, 25 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[25] ice0: link state changed to UP

[1] ice2: <Intel(R) Ethernet Connection E823-C for SFP - 1.43.3-k> mem 0xd0000000-0xd7ffffff,0xda010000-0xda01ffff at device 0.0 numa-domain 0 on pci8
[1] ice2: Loading the iflib ice driver
[1] ice2: The DDP package was successfully loaded: ICE OS Default Package version 1.3.41.0, track id 0xc0000001.
[1] ice2: fw 7.1.6 api 1.7 nvm 3.26 etid 8001bc8c netlist 0.0.2768-1.14.1.59461500 oem 1.3429.0
[1] ice2: Using 4 Tx and Rx queues
[1] ice2: Reserving 4 MSI-X interrupts for iRDMA
[1] ice2: Using MSI-X interrupts with 9 vectors
[1] ice2: Using 1024 TX descriptors and 1024 RX descriptors
[1] ice2: ice_add_rss_cfg on VSI 0 could not configure every requested hash type
[1] ice2: link state changed to UP
[1] ice2: Link is up, 25 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[1] ice2: netmap queues/slots: TX 4/1024, RX 4/1024
[5] ice2: All configured link modes were attempted but failed to establish link.
[5] ice2: The device will restart the process to establish link.
[5] ice2: Possible Solution: Check link partner connection and configuration.
[5] ice2: link state changed to DOWN
[25] ice2: Link is up, 25 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None
[25] ice2: link state changed to UP

Upgraded to 26.7.4 as I saw the release notes pointed out that if_ice was updated, no changes, still no link after DDP has loaded.
However I am not sure that the DDP package is?

Has anyone tried to install the newest driver and DDP from Intel 2.1.8?
I have tested to build it on 26.7.4 with the current kernel sources from github, but have not yet tried to install it as I am not quite sure how to perform a roll back and keep future upgrade path clean?

Same problem with no link on 25GbE, running both E810 and E823 and DDP after upgrading to 26.7
Without loading DDP we get link and about 1Gbps throughput on each NIC :/

E810-XXV fw 7.6.2 api 1.7 nvm 4.60
E823-C fw 7.1.6 api 1.7 nvm 3.26
ICE OS Default Package version 1.3.41.0

Same problem with no link on 25GbE, running both E810 and E823 and DDP after upgrading to 26.7
Without loading DDP we get link and about 1Gbps throughput on each NIC :/

E810-XXV fw 7.6.2 api 1.7 nvm 4.60
E823-C fw 7.1.6 api 1.7 nvm 3.26
ICE OS Default Package version 1.3.41.0