"
HI all...
Got this dual lan card
em1@pci0:2:0:1: class=0x020000 rev=0x06 hdr=0x00 vendor=0x8086 device=0x105e subvendor=0x8086 subdevice=0x135e
vendor = 'Intel Corporation'
device = '82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications)'
class = network
subclass = ethernet
Its running through proxmox with a partial passthrough
It works well for a while, but after 24 hours or a couple of days, my 500MB connection drops to below 100mbps
I never had this issue on PFsense for several years with this model of card so thats why I dare to ask here.
The modem is not limiting anything, i tested with another NIC on another system.
The setup is:
This 2x1gbe card using only one port for WAN / other port is unused (the behavior is observed on both ports )
Another card at 2x10gbe using only one port for wan, the other port is for the proxmox upstream itself.
Any clue before I try to change for another model (is there a compatibility issue)
thanks for any input
Got this dual lan card
em1@pci0:2:0:1: class=0x020000 rev=0x06 hdr=0x00 vendor=0x8086 device=0x105e subvendor=0x8086 subdevice=0x135e
vendor = 'Intel Corporation'
device = '82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications)'
class = network
subclass = ethernet
Its running through proxmox with a partial passthrough
It works well for a while, but after 24 hours or a couple of days, my 500MB connection drops to below 100mbps
I never had this issue on PFsense for several years with this model of card so thats why I dare to ask here.
The modem is not limiting anything, i tested with another NIC on another system.
The setup is:
This 2x1gbe card using only one port for WAN / other port is unused (the behavior is observed on both ports )
Another card at 2x10gbe using only one port for wan, the other port is for the proxmox upstream itself.
Any clue before I try to change for another model (is there a compatibility issue)
thanks for any input
