"
Will probably go for ROXY9 and AIF, at the end.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
25.7, 25.10 Series / Re: OPNsense dies every 24th hour or so
December 04, 2025, 10:10:42 PM
Well, other NICS is out, there is not enough space and only one slot on the MB.
Since it worked W/O any problem with CENTOS, well, it has to be an OPNsense issue and not an HW-isue.
Since it worked W/O any problem with CENTOS, well, it has to be an OPNsense issue and not an HW-isue.
#3
25.7, 25.10 Series / Re: OPNsense dies every 24th hour or so
December 04, 2025, 09:33:35 PM
Yes I did.
#4
25.7, 25.10 Series / Re: OPNsense dies every 24th hour or so
December 04, 2025, 08:23:38 PM
Yes I did.
Before OPNsense i was running CENTOS7 with an IP-tables firewall (https://github.com/arno-iptables-firewall/aif/), without any problems.
Before OPNsense i was running CENTOS7 with an IP-tables firewall (https://github.com/arno-iptables-firewall/aif/), without any problems.
#5
25.7, 25.10 Series / OPNsense dies every 24th hour or so
December 04, 2025, 07:48:46 PM
Every 24 hour OPNsense dies, and throughput goes down to zero.
This happens when I do large uploads, i.e full bandwidth 600 Mb/s for 24 hours continuously.
After re-boot bandwidth is restored for an additional 24 hours.
Sometimesm it goes down after half an hour
HW is Gigabyte N3150 based MB, with realtek super-io (2x 1Gb/s Lan-ports).
Intel Celeron N3150, 4 cores @ 1,6 GHz
4g MEMORY.
No overheating, memory usage around 16%, CPU maxes out at 40% on the peaks.
Any sugestions on where to look.
This happens when I do large uploads, i.e full bandwidth 600 Mb/s for 24 hours continuously.
After re-boot bandwidth is restored for an additional 24 hours.
Sometimesm it goes down after half an hour
HW is Gigabyte N3150 based MB, with realtek super-io (2x 1Gb/s Lan-ports).
Intel Celeron N3150, 4 cores @ 1,6 GHz
4g MEMORY.
No overheating, memory usage around 16%, CPU maxes out at 40% on the peaks.
Any sugestions on where to look.
#6
25.7, 25.10 Series / Re: Looses external connection a couple of times every day
November 12, 2025, 07:06:48 AM
I will se what happens, I have installed the realtek-plugin, so far so good.
#7
25.7, 25.10 Series / Re: Looses external connection a couple of times every day
November 11, 2025, 07:41:18 PM
Well, I cannot install any other NICs, there is not enough space in the box, and only one PCI expansion-slot, space for the expansion card ois occupied by the case-fan.
Cabinet is a cut-down 1U chassies, 250 mm deep to fit into a 19inch wall rack.
MB is an Gigabyte N3150 ITX-card
Cabinet is a cut-down 1U chassies, 250 mm deep to fit into a 19inch wall rack.
MB is an Gigabyte N3150 ITX-card
#8
25.7, 25.10 Series / Re: Looses external connection a couple of times every day
November 11, 2025, 06:15:08 PM
There is no possibility to change NIC,.
The thing is that I have previously used an CENTOS7-based firewall/GW/Router with this MB, without any problems at all.
So, installing this plugin, might resolve the issue?
The thing is that I have previously used an CENTOS7-based firewall/GW/Router with this MB, without any problems at all.
So, installing this plugin, might resolve the issue?
#9
25.7, 25.10 Series / Looses external connection a couple of times every day
November 11, 2025, 06:25:31 AM
25.7.7_4amd64
The firewall looses IP on external IF a couple of times every day. A reboot solves the problem.
What I can see in the logs is the following:
The firewall looses IP on external IF a couple of times every day. A reboot solves the problem.
What I can see in the logs is the following:
Quote2025-11-11T05:12:37Noticedhcp6cdhcp6c_script: EXIT on re1 executing
2025-11-11T05:12:37Noticesyslog-ngsyslog-ng shutting down; version='4.10.2'
2025-11-11T05:12:34Noticekernel<6>[29556] re0: link state changed to DOWN
2025-11-11T05:12:34Noticekernel<6>[29556] re0: watchdog timeout
2025-11-11T05:11:47Noticekernel<6>[29509] re0: link state changed to UP
2025-11-11T05:11:43Noticekernel<6>[29505] re0: link state changed to DOWN
2025-11-11T05:11:43Noticekernel<6>[29505] re0: watchdog timeout
2025-11-11T05:11:37Noticedhclientdhclient-script: Reason PREINIT on re0 executing
2025-11-11T05:11:36Noticeopnsense/usr/local/etc/rc.linkup: DEVD: Ethernet attached event for wan(re0)
2025-11-11T05:11:36Noticekernel<6>[29498] re0: link state changed to UP
2025-11-11T05:11:32Criticaldhclientexiting.
2025-11-11T05:11:32Errordhclientconnection closed
2025-11-11T05:11:32Noticeopnsense/usr/local/etc/rc.linkup: DEVD: Ethernet detached event for wan(re0)
2025-11-11T05:11:32Noticekernel<6>[29494] re0: link state changed to DOWN
2025-11-11T05:11:32Noticekernel<6>[29494] re0: watchdog timeout
#10
Hardware and Performance / Installing gKrellM on OPNSense
November 03, 2025, 08:31:28 PM
Is it possible to install gKrellM on OPNsense?
It would be nice, so I can remotly monitor the firewall in a simple way (Temperatures etc).
gKrellM is the only x-plattform applikation, that I have found, that can do this over the network.
It would be nice, so I can remotly monitor the firewall in a simple way (Temperatures etc).
gKrellM is the only x-plattform applikation, that I have found, that can do this over the network.
Pages1
