Messages

The client was on a cell phone on the cellular network for internet.

As a sanity check, I backed up my configuration and reinstalled opnsense to see if the problem persisted.  It did not, the reinstall fixed it.  I have not had a chance to compare configurations to see what change was made that caused the issue, but it has been resolved.  Thank you for your help!

Thank you for the suggestion.  I have changed the port for opnsense's GUI (8080) and disabled redirect.  Still unable to connect when forwarding to a server.

Sorry for the probably simple question. New to opnsense, coming from a simpler solution and trying to learn.

I have a typical setup with a Static IP from my ISP on a WAN interface, and a LAN interface with two web servers. If I go on the web servers, they can access the internet, no issues for Outbound NAT. But I'm running into issues with Port Forwarding. If I create a couple of port forwards like the ones below, it does not connect from my phone on a separate cell connection, either directly from my static IP or from a domain that points there. The webserver alias in this case is the IP address of one of the servers on the LAN interface (192.168.1.178 in this instance). Same result if I change the alias to the other web server's IP (192.168.1.177), or if I forgo alias and put the IP addresses in directly.



In my attempt to try to troubleshoot what was going on, I tried to direct it to the LAN interface address of my router (192.168.1.1), and that works. It warns of a redirect attack instead of showing the opnsense login screen, which makes sense, but it actually connects to the machine.

I'm sure there's a setting somewhere denying the connection, but I'm unsure where to look for it. Any advice is appreciated.

Below are the Firewall rules I currently have, if that helps. They were all generated by opnsense, except for the ICMP one (pinging was one of my steps to figure it out). Let me know if expanding the ones under the collapse is helpful.