Messages

this is the rule, and it is the mediaserver interface that is encountering issues, it is configured in the exact same way as storage, testing and all the others, yet it is the only one encountering issues.

the host that i cant ping has the proper ip, thats the thing, it worked before the update, and i checked but there seems nothing wrong with ip allocation, going into console on the device reveals it has the intended (10.108.50.10) ip, and there is nothing else between there no.


and yes services on vlan 50 are unreachable, they have no access to the internet after a reboot of the system with the newest firmware, before this it worked, and no configurations were changed. if i disable and re enable the interface of vlan 50 (mediaserver) it works again

ah yes, i am indeed using lan, the interface only has one rule which is allowing all traffic out to the internet

so in the previous version things were just working by chance? how would i go about fixing things? im unsure how to proceed.

LAN interface connected to WAN ofc

What do you mean by this?

forget it haha, was just me weirdly wording things

Sorry for the lack of details, here goes.

im pinging through tailscale which pings from 10.108.1.100 to 10.108.1.1(opnsense), 10.108.50.1(vlan gateway), 10.108.50.10(service)
nothing comes up in live log really, i cant see anything related to the specific ip's

setup is as follows, LAN interface connected to WAN ofc, and a number of vlans with LAN as parent

Is your LAN interface as well assigned and an IP e.h is untagged?

im not quite sure what you mean with this, could you elaborate?

Hello,
Im using opnsense in my homelab and a little while back i upgraded from version 24.7.12_2 to the newest version of 25.1.something. back then one of my vlans didnt work, so i restored a backup and moved on. Now i updated to the newest version (25.1.4_1) again, but the vlan still doesnt work, to be precise after a system reboot it seems to not allow any traffic to pass unless i manually disable and re enable the interface, then it goes back to normal, i can ping opnsense and the vlan gateway but not the machine on the vlan. the interface is a vlan with LAN as parent, weirdly all other vlans work perfectly, even after a reboot. Ive tried removing the interface and the vlan and reconfiguring them but this did not help.
id greatly appreciate your input!