Messages

1

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 14, 2024, 01:13:55 pm »

Code: [Select]

root@OPNsense:~ # smartctl -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Seagate FireCuda 510 SSD ZP500GM30001
Serial Number:                      7QC00DK8
Firmware Version:                   STOSC014
PCI Vendor/Subsystem ID:            0x1bb1
IEEE OUI Identifier:                0x0024cf
Total NVM Capacity:                 500,107,862,016 [500 GB]
Unallocated NVM Capacity:           0
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          500,107,862,016 [500 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            0024cf 0140003d42
Local Time is:                      Thu Nov 14 23:11:18 2024 AEDT
Firmware Updates (0x1e):            7 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005d):     Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x08):         Telmtry_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     90 Celsius
Critical Comp. Temp. Threshold:     95 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     7.14W       -        -    0  0  0  0        0       0
 1 +     5.43W       -        -    1  1  1  1        0       0
 2 +     4.57W       -        -    2  2  2  2        0       0
 3 -   0.0490W       -        -    3  3  3  3     2000    2000
 4 -   0.0018W       -        -    4  4  4  4    25000   25000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         2
 1 -    4096       0         1

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        64 Celsius
Available Spare:                    100%
Available Spare Threshold:          5%
Percentage Used:                    0%
Data Units Read:                    120,454 [61.6 GB]
Data Units Written:                 2,066,021 [1.05 TB]
Host Read Commands:                 4,990,699
Host Write Commands:                33,698,926
Controller Busy Time:               50
Power Cycles:                       58
Power On Hours:                     3,499
Unsafe Shutdowns:                   55
Media and Data Integrity Errors:    0
Error Information Log Entries:      8
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Thermal Temp. 1 Transition Count:   4
Thermal Temp. 2 Transition Count:   2
Thermal Temp. 1 Total Time:         30313
Thermal Temp. 2 Total Time:         10892

Error Information (NVMe Log 0x01, 16 of 63 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
Num  Test_Description  Status                       Power_on_Hours  Failing_LBA                                                                                                                                                                                                                                               NSID Seg SCT Code
 0   Short             Completed without error                   0            -                                                                                                                                                                                                                                                  -   -   -    -

root@OPNsense:~ #


2

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 11, 2024, 09:48:19 am »

This is Opnsense with no fault:

3

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 11, 2024, 09:29:04 am »

crashed again, but my N100 is DDR5 so if you say Samsung/ SKYHNIX ?

4

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 07, 2024, 01:37:15 pm »

Well I raised a case with Optus, and they blame NBN, then ofc, now its seems to be online, since, but i do notice randomly unbound dns will stop and that drops my internet. I will continue to monitor this.

I used to run a ASUS RT3000 but its stopped working, I generally suspect ISP is playing this game cause we choose to BYO Modem and they dont like it maybe.

Thanks

5

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 06, 2024, 10:21:55 am »

Crucial CT16G48C40S5 16GB 4800MHz CL40 Black DDR5 Laptop RAM Memory

6

24.7 Production Series / Re: [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: November 03, 2024, 05:20:05 am »

Please see attached,

I have to turn off the opnsense and turn it back on for internet to work again.

If I have to do that, I can schedule a daily reboot, but I want to know is it Optus or Me?

Thanks
Synice

7

24.7 Production Series / [AUSTRALIA]Opnsense on N100 - Optus NBN

« on: October 26, 2024, 08:14:08 am »

Hi All,

I've updated to 24.7 from 24.1 and I am connected to Opnsense via a cisco switch, today alone, I had to turn off the Opnsense and turn it back on to restore internet.

3:15PM AEDT
4:50PM AEDT

I've been submitting them crash reports non-stop...

not sure what is the issue.