"
Issue persist with 24.7.8 with erratic IPv6 prefix avaibility
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
24.7, 24.10 Production Series / Re: IPv6 prefix delegation not working with 24.7.1-.3
November 07, 2024, 12:40:51 AM #2
24.7, 24.10 Production Series / Re: IPv6 prefix delegation not working with 24.7.1-.3
October 10, 2024, 05:39:11 AM
Hi,
I also encounter weird behavior with IPv6 since september
Unfortunately my technical knowledge's very limited and english not my primary language but i will try to report the problem.
I connect to my ISP with fiber link and PPPoE. He give me /48 and everything's good since 1,5+ years.
My settings in WAN interface:
type DHCPv6
Configuration mode basic
Use IPv4 connectivity check
Request prefix only check
Send prefix hint check
no optional ID or interface ID
(it has always worked with those settings)
The problem is the same with the 2 OPNsense boxes that I have (both connected to the same ISP, same settings, but different location)
WAN is getting IPv6 with gateway monitoring OK. But it seems PD broken because LAN (track interface mode) doesn't get IPv6 and so are the devices behind.
Tried various settings / multiple reboots / PPPoE reload nothing really seems to correct the problem and sometimes with no warning PD work LAN get it's delegation and everything work as intented and can stay for days like that (but since i'm always tinkering with my homelab i often reboot the OPNsense box and thus loose IPv6).
I do not like IPv4 and really prefer to use IPv6 everywhere I can.
Updated today to 24.7.6 same problem happen unfortunately
Please excuse my english
Regards
I also encounter weird behavior with IPv6 since september
Unfortunately my technical knowledge's very limited and english not my primary language but i will try to report the problem.
I connect to my ISP with fiber link and PPPoE. He give me /48 and everything's good since 1,5+ years.
My settings in WAN interface:
type DHCPv6
Configuration mode basic
Use IPv4 connectivity check
Request prefix only check
Send prefix hint check
no optional ID or interface ID
(it has always worked with those settings)
The problem is the same with the 2 OPNsense boxes that I have (both connected to the same ISP, same settings, but different location)
WAN is getting IPv6 with gateway monitoring OK. But it seems PD broken because LAN (track interface mode) doesn't get IPv6 and so are the devices behind.
Tried various settings / multiple reboots / PPPoE reload nothing really seems to correct the problem and sometimes with no warning PD work LAN get it's delegation and everything work as intented and can stay for days like that (but since i'm always tinkering with my homelab i often reboot the OPNsense box and thus loose IPv6).
I do not like IPv4 and really prefer to use IPv6 everywhere I can.
Updated today to 24.7.6 same problem happen unfortunately
Please excuse my english
Regards
Pages1
