Messages

1

24.7 Production Series / Re: Update to 24.7.2 results in kernel panic

« on: August 29, 2024, 05:20:37 pm »

Hi All,

the update from 24.7.2 with the ZFS patch removed to 24.7.3 went smoothly. My box boots up normal.

I have verified that the ZPOOL_IMPORT_PATH is in the rc file again.

So the Topic is solved for me.

Regards

Marian

2

24.7 Production Series / Re: Update to 24.7.2 results in kernel panic

« on: August 25, 2024, 01:32:41 pm »

@franco

Sorry for the late response. It is har to schedule a maintenance window with the family ;-)

I have done as requested and installed the dbg kernel. I have reproduced the kernel panic and have the vmcore file.

What is the preferred way of sharing the file?

Regards

Marian

3

24.7 Production Series / Re: Update to 24.7.2 results in kernel panic

« on: August 23, 2024, 04:56:44 pm »

I have tested the update with the patch reverted. The system is booting normal.

HW: Gateprotect GPO 150, Intel(R) Atom(TM) CPU D525   @ 1.80GHz, Samsung SSD, with ZFS, used serial image to install

After the first kernel panic, I did a fresh ZFS install, did a pkg update and pkg upgrade via serial, reverted the patch an reboot. Seems to work fine so far.

Regards
Marian

4

24.7 Production Series / Re: Update to 24.7.2 results in kernel panic

« on: August 22, 2024, 08:49:22 am »

No Surricata, no ZenArmor and a Hardware machine. It is an old Gateprotect gpo 150

5

24.7 Production Series / [SOLVED] Update to 24.7.2 results in kernel panic

« on: August 22, 2024, 08:42:18 am »

Hello community,

I have a problem with my opnsense after updating from 24.7.1 to 24.7.2. After the reboot  I get a kernel panic:

Mounting filesystems...


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x0
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff804d7de7
stack pointer           = 0x28:0xfffffe00715ddb20
frame pointer           = 0x28:0xfffffe00715ddb40
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 31 (zpool)
rdi: fffff8000378c000 rsi: 0000000000020005 rdx: 000000000000000b
rcx: fffff80003768900  r8: 0000000000000001  r9: 0000000000000000
rax: 0000000000000000 rbx: fffff8000378c000 rbp: fffffe00715ddb40
r10: 0000000000000016 r11: fffff8004ff73520 r12: 0000000000002000
r13: 0000000000020005 r14: fffff8000378b700 r15: fffff8000378b600
trap number             = 12
panic: page fault
cpuid = 0
time = 1009843225
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00715dd810
vpanic() at vpanic+0x131/frame 0xfffffe00715dd940
panic() at panic+0x43/frame 0xfffffe00715dd9a0
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00715dda00
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00715dda50
calltrap() at calltrap+0x8/frame 0xfffffe00715dda50
--- trap 0xc, rip = 0xffffffff804d7de7, rsp = 0xfffffe00715ddb20, rbp = 0xfffffe00715ddb40 ---
agp_close() at agp_close+0x57/frame 0xfffffe00715ddb40
giant_close() at giant_close+0x68/frame 0xfffffe00715ddb90
devfs_close() at devfs_close+0x4b3/frame 0xfffffe00715ddc00
VOP_CLOSE_APV() at VOP_CLOSE_APV+0x1d/frame 0xfffffe00715ddc20
vn_close1() at vn_close1+0x14c/frame 0xfffffe00715ddc90
vn_closefile() at vn_closefile+0x3d/frame 0xfffffe00715ddce0
devfs_close_f() at devfs_close_f+0x2a/frame 0xfffffe00715ddd10
_fdrop() at _fdrop+0x11/frame 0xfffffe00715ddd30
closef() at closef+0x24a/frame 0xfffffe00715dddc0
closefp_impl() at closefp_impl+0x58/frame 0xfffffe00715dde00
amd64_syscall() at amd64_syscall+0x100/frame 0xfffffe00715ddf30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00715ddf30
--- syscall (6, FreeBSD ELF64, close), rip = 0x18d8eaaf52ba, rsp = 0x18d8f2980d88, rbp = 0x18d8f2980da0 ---
KDB: enter: panic
[ thread pid 31 tid 100264 ]
Stopped at      kdb_enter+0x33: movq    $0,0xfd9962(%rip)

A clean reinstall of 24.7 with a config backup works, but after updating to 24.7.2 again, the kernel panic shows up again.

I have tried a different memory module without any success.

Any ideas what I can do?

Kind Regards

Marian